I have attached the log file portion the last two successful transfers and
the start of the failed transfers
On Mon, May 31, 2010 at 6:38 PM, Yutaka Sato <email@example.com> wrote:
> In message <_A4820@delegate-en.ML_>
> on 05/30/10(21:00:06)
> you Vijay Pandit <firstname.lastname@example.org> wrote:
> |I am using Delegate 9.9.7 as a FTP/SFTP gateway. Find that after some
> |are transferred successfully, Delegate starts re-using the port it
> |for the PASV command for the data transfer of the next file, and
> |transfers fail. Delegate returns a 550 error followed by a 500 errors.
> |errors are said to be permission errors, but all files on the server have
> |the same permissions.
> |The Delegate command used is
> |./delegated -rv ADMIN=root@local -P21 SERVER=ftp MOUNT="/* sftp://
> |The DeleGate FTP log is below
> |05/30 16:11:00.39  7+0/00000/0000X: ## discard previous (unused)
> |sock: 25 -> 29
> |05/30 16:11:00.39  7+0/00000/0000X: ## discard previous PORT sock
> |serv[RETR] 28 0
> |05/30 16:11:00.39  7+0/00000/0000X: --FTPdata reuse port# 36647
> |05/30 16:11:00.39  7+0/00000/0000X: ## [PASV] restored
> |05/30 16:11:00.39  7+0/00000/0000X: PASV [A][172,16,1,5,143,39] >>
> |227 Entering Passive Mode (172,16,1,5,143,39).^M
> |05/30 16:11:00.40  7+0/00000/0000X: #### close data connection
> |because of error.
> I need a little more log at least from the last successful transmission
> of retrieved file to the first failure shown in these lines.
> 9 9 Yutaka Sato <email@example.com> http://delegate.org/y.sato/
> ( ~ ) National Institute of Advanced Industrial Science and Technology
> _< >_ 1-1-4 Umezono, Tsukuba, Ibaraki, 305-8568 Japan
> Do the more with the less -- B. Fuller