Articles delegate-en/4618-4679 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 4618 - 4679   digest:
FTP Delegate
  11/04-01:22 . 4618  frederic montiton <> [59]
  Hi, I'm currently my hair with a maybe impossible configuration Client ===> DeleGate-FTP:2121 ===> DeleGate-FTP:21 ===> Any FTP server:21 Basically I want to have an authentication on the first Dele
  11/04-11:13 . 4619 (Yutaka Sato) [27]
  Hi, There can be several possible ways to chain FTP DeleGates, or relaying a FTP DeleGate to servers via another application level proxy as SOCKS, or relaying FTP clients transparenly via ipfw/iptab
odst.- & proxy issue
  11/05-20:18 . 4620  NoSFeRaTU <> [39]
  When using SERVER="http://odst.-:-/" and PROXY="x.x.x.x:3128" together request going with ip address, not a domain name. This cause troubles on virtual hosting servers. For example for http://delega
Delegate 9.9.5: syslog issue, does not log delete commands
  11/06-02:05 . 4621  HD Sorgenia | Andrea `Zuse' Balestrero <> [31]
  Hi. I'm configuring delegate v9.9.5 as reverse proxy for FTP / FTPS. I'm trying to send logs via syslog to our syslog server. I use the following option: SYSLOG=syslog:// (where 192.168
odst.- & proxy issue
  11/09-19:26 . 4622 (Yutaka Sato) [41]
  Hi, Maybe DeleGate should work as you expect. For a while, you will be able to make it work so with the following options: SERVER=http MOUNT="/* http://odst.-:-/* nvserv=-thru" -Eao instead of: SERV
Delegate 9.9.5: how to give public IP in PASV response?
  11/10-00:26 . 4623  HD Sorgenia | Andrea `Zuse' Balestrero <> [44]
  Hi. I'm configuring delegate v9.9.5 as reverse proxy for FTP / FTPS. In FTPS mode, our firewall does NAT, but no FTP protocol inspection is done (encrypted traffic does not permit it). So, in passiv
FTP Delegate
  11/10-01:50 . 4624  frederic montiton <> [132]
Delegate 9.9.5: how to give public IP in PASV response?
  11/10-08:57 . 4625 (Yutaka Sato) [37]
  Hi, Adding a SRCIF with "tcpbound" as follows will do mapping the address of the port after it is bound. SRCIF="" If your client can use EPSV instead of PASV, it can do it.
odst.- & proxy issue
  11/10-17:06 . 4626 (Yutaka Sato) [42]
  Hi, The following patch will be applied to the next release (9.9.6-pre2) to enable SERVER="http://odst.-:-" work as you expected together with PROXY. Cheers, Yutaka 9 9 Yutaka Sato <y.sato@delegate.
FTP Delegate
  11/10-18:20 . 4627 (Yutaka Sato) [121]
  Hi, I'm not sure what is the typical syntax for chained FTP servers with authentication at each hop. Also your syntax can be interpreted as follows typially: a@b@c@d -> user "a" at host "b" via host
  11/10-18:59 . 4628  frederic montiton <> [287]
  Re Yutaka, Your interpretation a@b@c@d -> user "a" at host "b" via host "c" via host "d" is not exactly what I try to do, in my case you start your session by open a session on 1st DeleGate server :
  11/10-22:57 . 4629 (Yutaka Sato) [42]
  Hi, Of course. I said that the x@y@z can be interpreted in multiple ways. Of course. It is realized with the tentative patch (of my one hour work) that is included in my previous message. I did it i
Delegate 9.9.5: syslog issue, does not log delete commands
  11/11-01:10 . 4630 (Yutaka Sato) [41]
  Hi, The remote logging by SYSLOG is just a copy of the local logging to LOGFILE and PROTOLOG (in xfrelog) and if there is no log for an action in LOGFILE nor in PROTOLOG, nothing is sent to SYSLOG t
FTP Delegate
  11/11-19:20 . 4631 (Yutaka Sato) [26]
  Hi, I uploaded 9.9.6-pre2 which includes the patch. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advanced Industrial Science and Techn
Delegate 9.9.5: FTP: AUTHORIZER is not "transparent"
  11/12-02:36 . 4632  HD Sorgenia | Andrea `Zuse' Balestrero <> [72]
  Hi again. I already asked you several questions, and your answers were helpful. Now I have the last problem. I mean: this one should be the last question, I shouldn't annoy you any more, after... :-
  11/12-07:45 . 4633 (Yutaka Sato) [29]
  Hi, Why don't you use a configuration as SERVER= instead of your one SERVER=ftp MOUNT="/**" The former can be a gateway bound to a single target server, and any
  11/12-09:14 . 4634 (Yutaka Sato) [45]
  Hi, We should be careful in forwarding authentication information, so it is not forwarded to the server automatically. You can do it by adding the MYAUTH parameter as follows: MYAUTH="%U:%P:ftp" Che
FTP Delegate
  11/12-23:17 . 4635  frederic montiton <> [166]
  Thanks, I try to compile it, but got this error : cgi.c: In function `int putenvs(const char*, const char**)': cgi.c:1399: error: `unsetenv' undeclared (first use this function) cgi.c:1399: error: (
  11/13-00:02 . 4636  frederic montiton <> [200]
  It's in fact a problem with <stdlib.h> under solaris 9 unsetenv function is not present.. I have to update my libgcc and gcc version I guess ... From: To: f
  11/13-00:06 . 4637 (Yutaka Sato) [48]
  Hi, On platform where unsetenv() is not available, it is expected to be substituted by maker/unsetenv.c of DeleGate, as follows: % nm -A */*.o | grep unsetenv maker/unsetenv.o: U _environ maker/unse
  11/13-00:30 . 4638 (Yutaka Sato) [34]
  Hi, Hmm... adding the definition of unsetenv() in src/env.c will solve the problem without upgrading gcc? Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) Natio
2 https certificates running on the same delegate host.
  11/17-09:15 . 4639  Huirong Wang <> [73]
  Dear Yutaka, As I know normally one delegate host just can be installed with 1 x SSL certificate only for https to http proxy, is that right? Is that possible to install 2 different SSL certificates
  11/17-09:57 . 4640 (Yutaka Sato) [35]
  Hi, certificate only for https to http proxy, is that right? Is that possible to install 2 different SSL certificates (not self-signed) on the same delegate host to achieve while end user goes to di
  11/17-10:29 . 4641  Huirong Wang <> [149]
  11/17-11:20 . 4642 (Yutaka Sato) [117]
  Hi, Please read the reference manual if you are interested in it. I made the enclosed patch which enables selecting a certificate for each incoming network interface as follows: DGROOT/etc/certs/sva
  11/17-15:15 . 4643  Huirong Wang <> [286]
  Dear Yutaka, I just tested it on our test platform, it's working! Thanks a lot. Before I apply it, can I ask you a question? Are you going to contain this specific patch in your future release or no
  11/17-17:17 . 4644 (Yutaka Sato) [22]
  Hi, Of course it is to be included in official releases. It has been in the TODO list for a long time (and has been in Manual.htm as "to-if-" which has been hidden as a comment) I uploaded 9.9.6-pre
FTP Delegate
  11/17-17:29 . 4645 (Yutaka Sato) [22]
  Hi, I uploaded 9.9.6-pre3 including a modification which might solve the comiplation problem on Solaris 9. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) Nati
Delegate 9.9.5: FTP: AUTHORIZER is not "transparent"
  11/17-18:02 . 4646 (Yutaka Sato) [39]
  Hi, I released 9.9.6-pre3 in which I introduced a MountOption "servon=init" to be used as follows: SERVER=ftp MOUNT="/** servon=init" This option makes DeleGate work similarly to
FTP Delegate
  11/17-20:21 . 4647  frederic montiton <> [144]
  Hi Yutaka, I give you an update : 1) Your patch works fine, it does exactly what I expected, thanks !! 2) On solaris 9, I've put the code function directly inside the cgi.c file and compilation work
  11/17-21:12 . 4648 (Yutaka Sato) [70]
  Hi, What is this -DNONC99 for? I tested it on my Solaris10 (on VMware) as follows: % uname -a SunOS sol10 5.10 Generic_118855-33 i86pc i386 i86pc % cc -v Reading specs from /usr/sfw/lib/gcc/i386-pc-
  11/18-00:44 . 4649  frederic montiton <> [211]
  Unfortunatly I use a Sparc processor, "SunOS 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V245", so I can't try your binary. I've found in fpoll.h May be I can try without "&&defined(__x86_64__)
2 https certificates running on the same delegate host.
  11/18-08:22 . 4650  Huirong Wang <> [116]
  Dear Yutaka, Thanks for your information. I will test this pre3 again. Does it require OpenSSL0.9.8g or laters too, same as SNI supporting? Best Regards, Huirong Wang ___ Looking to move this spring
FTP Delegate
  11/18-10:10 . 4651 (Yutaka Sato) [109]
  Hi Frederic, Hmm... Thank you, I see. I added the line in fpoll.h at 9.8.0 for Solaris10/AMD64 two years ago. [CHANGES] 9.8.0 071102 fix {yselect,fpoll}.h: coped with CFLAGS=-m64 on Solaris10/amd64
2 https certificates running on the same delegate host.
  11/18-10:18 . 4652 (Yutaka Sato) [21]
  Hi, No. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advanced Industrial Science and Technology _< >_ 1-1-4 Umezono, Tsukuba, Ibaraki,
  11/18-14:14 . 4653  Huirong Wang <> [102]
  Dear Yutaka, Much appreciated. Best Regards, Huirong Wang ___ Download new and classic emoticon packs at Emoticon World Brought to you exclusively by Windows Live
FTP Delegate
  11/18-19:46 . 4654  frederic montiton <> [369]
  I did the "p.c" test, below my ouput results : 4 bytes : 78 128 1 101B75 1 101B74 : 1 [ 0] 1 [ 1] 101B75 [ 2] 1 [ 3] 101B74 [ 4] 1 [ 5] 102F74 [ 6] 0 [ 7] 4 [ 8] 0 [ 9] 109 [10] 0 [11] 44D58 8 bytes
Process control
  11/18-20:30 . 4655  Sebastien Barbereau <> [47]
  Hello, I did put my delegate server in production this morning and the result was a very 'slow' web browsing experience for users. In the logs i could see the following entries 11/18 09:25:41.48 [10
FTP Delegate
  11/18-22:04 . 4656 (Yutaka Sato) [39]
  Hi, Thank you for your test. Then I hope the patch enclosed will work. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advanced Industria
Large emails and POP3
  11/19-01:58 . 4657  "Adrian Partridge" <> [30]
  Hello Yutaka, I have delegate running as a transparent proxy passing emails into spamassassin via a FTOCL. This solution has been running for nearly a year without a single problem! Recently our ema
FTP Delegate
  11/19-04:20 . 4658 (Yutaka Sato) [32]
  Hi, Sorry, it causes compilation error due to unbalanced #if/#endif. I'll do it as the enclosed patch. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National
Process control
  11/19-05:12 . 4659 (Yutaka Sato) [52]
  Hi, Your understanding is right. To avoid serious result on memory exhaustion by overloading, DeleGate tries automatic adjusting of the value of MAXIMA=delegated based on the estimated size of free
Large emails and POP3
  11/19-07:15 . 4660 (Yutaka Sato) [32]
  Hi, The log of a POP session in your DeleGate's LOGFILE including the word "FTOCL" when it failed will be helpful. Cheers, Yutaka 9 9 Yutaka Sato <> (
dynamic log level contol (Re: Process control)
  11/19-11:27 . 4661 (Yutaka Sato) [45]
  Hi, Here are two ways to control log level of the running DeleGate after version 9.8.2. But basically they have been only for single-process mode of DeleGate (mainly for WindowsCE). So in 9.9.6-pre4
FTP Delegate
  11/19-19:44 . 4662  frederic montiton <> [139]
  I've seen and correct it :) Also found why -DNONC99 flags is set : ld: fatal: file /usr/local/lib/gcc/sparc-sun-solaris2.10/3.4.6/../../../ wrong ELF class: ELFCLASS64 ld: fatal: File p
Large emails and POP3
  11/19-20:32 . 4663  "Adrian Partridge" <> [784]
  Hi Yutaka, Attached logfile as requested, generated with a -vd. I've chopped some lines because I keep 14 days worth of emails on our server. Log shows I have 2 emails to retrieve, one is 15mb in si
FTP Delegate
  11/19-23:35 . 4664 (Yutaka Sato) [44]
  Hi, Can I see whether or not you got the 64bits binary for Solaris10/SPARC which works for data larger than 4GB ? Is DeleGate/9.9.6-pre4 able to be made without modification? It is strange that gcc
Large emails and POP3
  11/20-10:25 . 4665 (Yutaka Sato) [143]
  Hi Adrian, Thank you for your log. It seems showing that your filter program "spamc" returns almost immediately without receiving the whole message. So what happens if you use /bin/cat instead of /u
FTP Delegate
  11/20-21:03 . 4666  frederic montiton <> [1282]
  11/21-02:24 . 4667  frederic montiton <> [137]
  Ignore my previous comment about FREAD function, no links with my problem.. Strange behaviour .. I've try a compilation : make CFLAGS="-O2 -m64" and it avoids the DNONC99 issue. compiles, but, I can
  11/22-23:40 . 4668 (Yutaka Sato) [29]
  Hi, I uploaded 9.9.6-pre5 which can be compiled without C++ to avoid many strange problems in compilation and linking for C++ on HP-UX, AIX and Solaris/SPARC_64 :) Your RESOLV="" problem can be also
  11/23-16:06 . 4669 (Yutaka Sato) [34]
  Hi, Sorry, I found another linkage problem for "strcasestr()" on Solaris with -DQSC in 9.9.6-pre5. I uploaded 9.9.6-pre6 including the fix for it. Also I found that the "make" on Solaris does not se
Delegate - AIX 6.1 Compilation Errors
  11/23-16:47 . 4670 (Yutaka Sato) [47]
  Hi, Since most of porting problem of DeleGate (on HP-UX, AIX and SPARC) are caused by linkage problem in C++, I made a new version of DeleGate (9.9.6-pre6) that can be build without C++. I hope that
FTP Delegate
  11/25-02:37 . 4671  frederic montiton <> [185]
  Hi, Thanks for your 2 versions during weekend, I've try to use DELEGATE_CONF to compile as you suggested (expect for the DGROOT parameter) ADMIN=foo@bar CFLAGS=-m64 -O2 -DQSC LDOPTS=-m64 CFLAGSPLUS=
  11/25-05:23 . 4672 (Yutaka Sato) [59]
  Hi, Can you resolv WWW.DeleGate.ORG on your host as follows for example? % dig WWW.DeleGate.ORG % nslookup WWW.DeleGate.ORG If you can immediately get responses for these, the problem is in DeleGate
  11/25-05:56 . 4673 (Yutaka Sato) [54]
  Hi Fred, If you have the core file remaining, then the stack trace of it will give us an important hint where it died. % mdb src/dg.exe core Or if you can reproduce the "Bus Error" with "src/dg.exe
delegate problem with X11
  11/26-01:02 . 4674  carine castillon <> [33]
  Dear Yukata, I'm using delegate 9.9.4 and I have a problem with telnet/x11. I use the "x server" option to open display during a telnet connection. After few minutes without using the session, the d
  11/26-05:48 . 4675 (Yutaka Sato) [43]
  Hi, I don't see the reason but the log around the above one, without "-vt" option will explain what was happend. And you are recommended to use DeleGate/9.9.6-pre2 or after in which you can disable
  11/26-08:26 . 4676 (Yutaka Sato) [52]
  Hi, As long as I know, this "No permission" error occurs only when a new X client at host [x.x.x.x] tried to connect the X proxy[b.b.b.b] not from the host[c.c.c.c] to which you did login via Telnet
Vstr overflow in Dg 9.9.5 sftp.c
  11/26-21:10 . 4677  Vijay Pandit <> [74]
  Hi Yutaka, I am running Delegate 9.9.5 on Slackware as a FTP to SFTP gateway (reverse proxy for SFTP server).The SFTP server directory has a large number of text files (about 16000), each around 15K
  11/27-08:55 . 4678 (Yutaka Sato) [38]
  Hi, Hmm... It seems caused by timeout of 3 seconds. I'll modify it as the following patch (in 9.9.6-pre8 or 9.9.6) Cheers, Yutaka 9 9 Yutaka Sato <> (
  11/30-10:37 . 4679  Vijay Pandit <> [34]
  Hi Yutaka, Applied the supplied patch on sftp.c and recompiled - displays the listing OK now   Cheers   Vijay ___ Win 1 of 4 Sony home entertainment packs thanks to Yahoo!7. Enter now: http://au.doc
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:02/23 07:14:26 (3 sec) Expires:02/23 13:14:23 @_@V