Articles delegate-en/4601-4700 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 4601 - 4700   digest:
Forbidden page
  10/01-21:43 . 4601  D R <> [71]
  Hi Yataka, Thank you for the fast reply. However, I cannot find the paths described in the link. I'm using the windows build. Does that change the location of the customizable files? Thanks, Dave
  10/02-07:49 . 4602 (Yutaka Sato) [38]
  Hi, The right hand value of the MOUNT parameter can be any URL which indicates the location of the data to be used. For example, you can put it on your local disk as follows: echo "Forbidden" > c:\t
Fwd: multiple SSL certificates on the same delegate host without using SNI.
  10/02-10:23 . 4603  David Wang <> [95]
  Hi Yutaka, Any response is much appreciated. Regards David --- Forwarded message --- From: David Wang <> Date: Wed, Sep 30, 2009 at 3:08 PM Subject: multiple
Forbidden page
  10/06-00:25 . 4604  D R <> [121]
  Hi Yutaka, Thank you for your help. Is there a way to remove the V link at the bottom of the customized page? Thanks, Dave
  10/06-10:18 . 4605 (Yutaka Sato) [15]
  Hi, There is not a way to do so in the non-commercial version. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advanced Industrial Scienc
Fwd: multiple SSL certificates on the same delegate host without using SNI.
  10/06-10:53 . 4606  David Wang <> [98]
  Hi Yutaka, Can I know why no any response on this question? Is that any wrong with what I did? Kind regards, David --- Forwarded message --- From: David Wang <
PERMIT Permission bug?
  10/09-21:33 . 4607  NoSFeRaTU <> [57]
  10/09 16:12:41.30 [14021] 0+0: ext[0] SERVER=https 10/09 16:12:41.30 [14021] 0+0: ext[1] HOSTLIST= 10/09 16:12:41.30 [14021] 0+0: ext[2] PERMIT=*:*: 10/09 16:12:41.30 [14021] 0
  10/10-17:11 . 4608 (Yutaka Sato) [19]
  Re: [DeleGate-En] PERMIT Permission bug? I'm not sure but it might be a side effect of your configuration which is not shown in the log. By the way, what does this HOSTLIST mean? Cheers, Yutaka 9 9
  10/10-18:47 . 4609  NoSFeRaTU <> [27]
  It means nothing, just a result of experiments with parameters :-) Problem appears with this simple config: -P5555 SERVER=http PERMIT="*:*:" I found out why it happens. It is because 10.1
  10/11-17:50 . 4610 (Yutaka Sato) [134]
  Hi, I see. I found the problem can be reproduced with "SAC=x.x.x.x" option to simulate an access control for access from a client "x.x.x.x" as follows. This test does not need any change of configur
  10/12-00:35 . 4611  NoSFeRaTU <> [174]
  <-- CUT --> I applied enclosed patch across 9.9.5, under simulation with SAC="" seems works with: delegated SERVER=http HOSTS="nosferatu.gnet/{,}" SAC="" -dh PERMI
  10/15-06:50 . 4612 (Yutaka Sato) [30]
  Hi, It must not work becase the hostname is resolved to which does not match with Defining HOSTS that includes real name or address will suppress the real resolution and can c
  10/16-07:50 . 4613  NoSFeRaTU <> [55]
  SAC="nosferatu.gnet" YS> |-dh PERMIT="*:*:" After some investigation I found in /etc/hosts that string: nosferatu.gnet nosferatu which seems come with OS installation. I have ch
Delegate - AIX 6.1 Compilation Errors
  10/24-17:48 . 4614  Antonio Hernandez Jr <> [74]
  Hello, We like to install the latest Delegate on our new AIX servers 6.1(oslevel 6100-00-00-000X), 64bit Hardware and Kernel having both C compilers XL C/C++ 10.1.04 and GNU gcc-4.2.4-1. We followed
  10/26-18:02 . 4615 (Yutaka Sato) [36]
  Hi, These errors occurs by lacking of some symbols in object files under maker/ as bzero.o and socklen_*.o which must be included into lib/libsubst.a. You will be able to see the reason of the compi
Delegate 9.9.5: how to disable "CD //"?
  10/27-00:20 . 4616  HD Sorgenia | Andrea `Zuse' Balestrero <> [24]
  I'm configuring delegate v9.9.5 as reverse proxy for FTP / FTPS. There is a feature, enabled by default, that I don't like: external user seems to be allowed to access delegate with anonymous accoun
  10/27-00:49 . 4617 (Yutaka Sato) [27]
  Hi, The option RELAY=no will disable relaying to servers other than MOUNTed ones. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advance
FTP Delegate
  11/04-01:22 . 4618  frederic montiton <> [59]
  Hi, I'm currently my hair with a maybe impossible configuration Client ===> DeleGate-FTP:2121 ===> DeleGate-FTP:21 ===> Any FTP server:21 Basically I want to have an authentication on the first Dele
  11/04-11:13 . 4619 (Yutaka Sato) [27]
  Hi, There can be several possible ways to chain FTP DeleGates, or relaying a FTP DeleGate to servers via another application level proxy as SOCKS, or relaying FTP clients transparenly via ipfw/iptab
odst.- & proxy issue
  11/05-20:18 . 4620  NoSFeRaTU <> [39]
  When using SERVER="http://odst.-:-/" and PROXY="x.x.x.x:3128" together request going with ip address, not a domain name. This cause troubles on virtual hosting servers. For example for http://delega
Delegate 9.9.5: syslog issue, does not log delete commands
  11/06-02:05 . 4621  HD Sorgenia | Andrea `Zuse' Balestrero <> [31]
  Hi. I'm configuring delegate v9.9.5 as reverse proxy for FTP / FTPS. I'm trying to send logs via syslog to our syslog server. I use the following option: SYSLOG=syslog:// (where 192.168
odst.- & proxy issue
  11/09-19:26 . 4622 (Yutaka Sato) [41]
  Hi, Maybe DeleGate should work as you expect. For a while, you will be able to make it work so with the following options: SERVER=http MOUNT="/* http://odst.-:-/* nvserv=-thru" -Eao instead of: SERV
Delegate 9.9.5: how to give public IP in PASV response?
  11/10-00:26 . 4623  HD Sorgenia | Andrea `Zuse' Balestrero <> [44]
  Hi. I'm configuring delegate v9.9.5 as reverse proxy for FTP / FTPS. In FTPS mode, our firewall does NAT, but no FTP protocol inspection is done (encrypted traffic does not permit it). So, in passiv
FTP Delegate
  11/10-01:50 . 4624  frederic montiton <> [132]
Delegate 9.9.5: how to give public IP in PASV response?
  11/10-08:57 . 4625 (Yutaka Sato) [37]
  Hi, Adding a SRCIF with "tcpbound" as follows will do mapping the address of the port after it is bound. SRCIF="" If your client can use EPSV instead of PASV, it can do it.
odst.- & proxy issue
  11/10-17:06 . 4626 (Yutaka Sato) [42]
  Hi, The following patch will be applied to the next release (9.9.6-pre2) to enable SERVER="http://odst.-:-" work as you expected together with PROXY. Cheers, Yutaka 9 9 Yutaka Sato <y.sato@delegate.
FTP Delegate
  11/10-18:20 . 4627 (Yutaka Sato) [121]
  Hi, I'm not sure what is the typical syntax for chained FTP servers with authentication at each hop. Also your syntax can be interpreted as follows typially: a@b@c@d -> user "a" at host "b" via host
  11/10-18:59 . 4628  frederic montiton <> [287]
  Re Yutaka, Your interpretation a@b@c@d -> user "a" at host "b" via host "c" via host "d" is not exactly what I try to do, in my case you start your session by open a session on 1st DeleGate server :
  11/10-22:57 . 4629 (Yutaka Sato) [42]
  Hi, Of course. I said that the x@y@z can be interpreted in multiple ways. Of course. It is realized with the tentative patch (of my one hour work) that is included in my previous message. I did it i
Delegate 9.9.5: syslog issue, does not log delete commands
  11/11-01:10 . 4630 (Yutaka Sato) [41]
  Hi, The remote logging by SYSLOG is just a copy of the local logging to LOGFILE and PROTOLOG (in xfrelog) and if there is no log for an action in LOGFILE nor in PROTOLOG, nothing is sent to SYSLOG t
FTP Delegate
  11/11-19:20 . 4631 (Yutaka Sato) [26]
  Hi, I uploaded 9.9.6-pre2 which includes the patch. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advanced Industrial Science and Techn
Delegate 9.9.5: FTP: AUTHORIZER is not "transparent"
  11/12-02:36 . 4632  HD Sorgenia | Andrea `Zuse' Balestrero <> [72]
  Hi again. I already asked you several questions, and your answers were helpful. Now I have the last problem. I mean: this one should be the last question, I shouldn't annoy you any more, after... :-
  11/12-07:45 . 4633 (Yutaka Sato) [29]
  Hi, Why don't you use a configuration as SERVER= instead of your one SERVER=ftp MOUNT="/**" The former can be a gateway bound to a single target server, and any
  11/12-09:14 . 4634 (Yutaka Sato) [45]
  Hi, We should be careful in forwarding authentication information, so it is not forwarded to the server automatically. You can do it by adding the MYAUTH parameter as follows: MYAUTH="%U:%P:ftp" Che
FTP Delegate
  11/12-23:17 . 4635  frederic montiton <> [166]
  Thanks, I try to compile it, but got this error : cgi.c: In function `int putenvs(const char*, const char**)': cgi.c:1399: error: `unsetenv' undeclared (first use this function) cgi.c:1399: error: (
  11/13-00:02 . 4636  frederic montiton <> [200]
  It's in fact a problem with <stdlib.h> under solaris 9 unsetenv function is not present.. I have to update my libgcc and gcc version I guess ... From: To: f
  11/13-00:06 . 4637 (Yutaka Sato) [48]
  Hi, On platform where unsetenv() is not available, it is expected to be substituted by maker/unsetenv.c of DeleGate, as follows: % nm -A */*.o | grep unsetenv maker/unsetenv.o: U _environ maker/unse
  11/13-00:30 . 4638 (Yutaka Sato) [34]
  Hi, Hmm... adding the definition of unsetenv() in src/env.c will solve the problem without upgrading gcc? Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) Natio
2 https certificates running on the same delegate host.
  11/17-09:15 . 4639  Huirong Wang <> [73]
  Dear Yutaka, As I know normally one delegate host just can be installed with 1 x SSL certificate only for https to http proxy, is that right? Is that possible to install 2 different SSL certificates
  11/17-09:57 . 4640 (Yutaka Sato) [35]
  Hi, certificate only for https to http proxy, is that right? Is that possible to install 2 different SSL certificates (not self-signed) on the same delegate host to achieve while end user goes to di
  11/17-10:29 . 4641  Huirong Wang <> [149]
  11/17-11:20 . 4642 (Yutaka Sato) [117]
  Hi, Please read the reference manual if you are interested in it. I made the enclosed patch which enables selecting a certificate for each incoming network interface as follows: DGROOT/etc/certs/sva
  11/17-15:15 . 4643  Huirong Wang <> [286]
  Dear Yutaka, I just tested it on our test platform, it's working! Thanks a lot. Before I apply it, can I ask you a question? Are you going to contain this specific patch in your future release or no
  11/17-17:17 . 4644 (Yutaka Sato) [22]
  Hi, Of course it is to be included in official releases. It has been in the TODO list for a long time (and has been in Manual.htm as "to-if-" which has been hidden as a comment) I uploaded 9.9.6-pre
FTP Delegate
  11/17-17:29 . 4645 (Yutaka Sato) [22]
  Hi, I uploaded 9.9.6-pre3 including a modification which might solve the comiplation problem on Solaris 9. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) Nati
Delegate 9.9.5: FTP: AUTHORIZER is not "transparent"
  11/17-18:02 . 4646 (Yutaka Sato) [39]
  Hi, I released 9.9.6-pre3 in which I introduced a MountOption "servon=init" to be used as follows: SERVER=ftp MOUNT="/** servon=init" This option makes DeleGate work similarly to
FTP Delegate
  11/17-20:21 . 4647  frederic montiton <> [144]
  Hi Yutaka, I give you an update : 1) Your patch works fine, it does exactly what I expected, thanks !! 2) On solaris 9, I've put the code function directly inside the cgi.c file and compilation work
  11/17-21:12 . 4648 (Yutaka Sato) [70]
  Hi, What is this -DNONC99 for? I tested it on my Solaris10 (on VMware) as follows: % uname -a SunOS sol10 5.10 Generic_118855-33 i86pc i386 i86pc % cc -v Reading specs from /usr/sfw/lib/gcc/i386-pc-
  11/18-00:44 . 4649  frederic montiton <> [211]
  Unfortunatly I use a Sparc processor, "SunOS 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V245", so I can't try your binary. I've found in fpoll.h May be I can try without "&&defined(__x86_64__)
2 https certificates running on the same delegate host.
  11/18-08:22 . 4650  Huirong Wang <> [116]
  Dear Yutaka, Thanks for your information. I will test this pre3 again. Does it require OpenSSL0.9.8g or laters too, same as SNI supporting? Best Regards, Huirong Wang ___ Looking to move this spring
FTP Delegate
  11/18-10:10 . 4651 (Yutaka Sato) [109]
  Hi Frederic, Hmm... Thank you, I see. I added the line in fpoll.h at 9.8.0 for Solaris10/AMD64 two years ago. [CHANGES] 9.8.0 071102 fix {yselect,fpoll}.h: coped with CFLAGS=-m64 on Solaris10/amd64
2 https certificates running on the same delegate host.
  11/18-10:18 . 4652 (Yutaka Sato) [21]
  Hi, No. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advanced Industrial Science and Technology _< >_ 1-1-4 Umezono, Tsukuba, Ibaraki,
  11/18-14:14 . 4653  Huirong Wang <> [102]
  Dear Yutaka, Much appreciated. Best Regards, Huirong Wang ___ Download new and classic emoticon packs at Emoticon World Brought to you exclusively by Windows Live
FTP Delegate
  11/18-19:46 . 4654  frederic montiton <> [369]
  I did the "p.c" test, below my ouput results : 4 bytes : 78 128 1 101B75 1 101B74 : 1 [ 0] 1 [ 1] 101B75 [ 2] 1 [ 3] 101B74 [ 4] 1 [ 5] 102F74 [ 6] 0 [ 7] 4 [ 8] 0 [ 9] 109 [10] 0 [11] 44D58 8 bytes
Process control
  11/18-20:30 . 4655  Sebastien Barbereau <> [47]
  Hello, I did put my delegate server in production this morning and the result was a very 'slow' web browsing experience for users. In the logs i could see the following entries 11/18 09:25:41.48 [10
FTP Delegate
  11/18-22:04 . 4656 (Yutaka Sato) [39]
  Hi, Thank you for your test. Then I hope the patch enclosed will work. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advanced Industria
Large emails and POP3
  11/19-01:58 . 4657  "Adrian Partridge" <> [30]
  Hello Yutaka, I have delegate running as a transparent proxy passing emails into spamassassin via a FTOCL. This solution has been running for nearly a year without a single problem! Recently our ema
FTP Delegate
  11/19-04:20 . 4658 (Yutaka Sato) [32]
  Hi, Sorry, it causes compilation error due to unbalanced #if/#endif. I'll do it as the enclosed patch. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National
Process control
  11/19-05:12 . 4659 (Yutaka Sato) [52]
  Hi, Your understanding is right. To avoid serious result on memory exhaustion by overloading, DeleGate tries automatic adjusting of the value of MAXIMA=delegated based on the estimated size of free
Large emails and POP3
  11/19-07:15 . 4660 (Yutaka Sato) [32]
  Hi, The log of a POP session in your DeleGate's LOGFILE including the word "FTOCL" when it failed will be helpful. Cheers, Yutaka 9 9 Yutaka Sato <> (
dynamic log level contol (Re: Process control)
  11/19-11:27 . 4661 (Yutaka Sato) [45]
  Hi, Here are two ways to control log level of the running DeleGate after version 9.8.2. But basically they have been only for single-process mode of DeleGate (mainly for WindowsCE). So in 9.9.6-pre4
FTP Delegate
  11/19-19:44 . 4662  frederic montiton <> [139]
  I've seen and correct it :) Also found why -DNONC99 flags is set : ld: fatal: file /usr/local/lib/gcc/sparc-sun-solaris2.10/3.4.6/../../../ wrong ELF class: ELFCLASS64 ld: fatal: File p
Large emails and POP3
  11/19-20:32 . 4663  "Adrian Partridge" <> [784]
  Hi Yutaka, Attached logfile as requested, generated with a -vd. I've chopped some lines because I keep 14 days worth of emails on our server. Log shows I have 2 emails to retrieve, one is 15mb in si
FTP Delegate
  11/19-23:35 . 4664 (Yutaka Sato) [44]
  Hi, Can I see whether or not you got the 64bits binary for Solaris10/SPARC which works for data larger than 4GB ? Is DeleGate/9.9.6-pre4 able to be made without modification? It is strange that gcc
Large emails and POP3
  11/20-10:25 . 4665 (Yutaka Sato) [143]
  Hi Adrian, Thank you for your log. It seems showing that your filter program "spamc" returns almost immediately without receiving the whole message. So what happens if you use /bin/cat instead of /u
FTP Delegate
  11/20-21:03 . 4666  frederic montiton <> [1282]
  11/21-02:24 . 4667  frederic montiton <> [137]
  Ignore my previous comment about FREAD function, no links with my problem.. Strange behaviour .. I've try a compilation : make CFLAGS="-O2 -m64" and it avoids the DNONC99 issue. compiles, but, I can
  11/22-23:40 . 4668 (Yutaka Sato) [29]
  Hi, I uploaded 9.9.6-pre5 which can be compiled without C++ to avoid many strange problems in compilation and linking for C++ on HP-UX, AIX and Solaris/SPARC_64 :) Your RESOLV="" problem can be also
  11/23-16:06 . 4669 (Yutaka Sato) [34]
  Hi, Sorry, I found another linkage problem for "strcasestr()" on Solaris with -DQSC in 9.9.6-pre5. I uploaded 9.9.6-pre6 including the fix for it. Also I found that the "make" on Solaris does not se
Delegate - AIX 6.1 Compilation Errors
  11/23-16:47 . 4670 (Yutaka Sato) [47]
  Hi, Since most of porting problem of DeleGate (on HP-UX, AIX and SPARC) are caused by linkage problem in C++, I made a new version of DeleGate (9.9.6-pre6) that can be build without C++. I hope that
FTP Delegate
  11/25-02:37 . 4671  frederic montiton <> [185]
  Hi, Thanks for your 2 versions during weekend, I've try to use DELEGATE_CONF to compile as you suggested (expect for the DGROOT parameter) ADMIN=foo@bar CFLAGS=-m64 -O2 -DQSC LDOPTS=-m64 CFLAGSPLUS=
  11/25-05:23 . 4672 (Yutaka Sato) [59]
  Hi, Can you resolv WWW.DeleGate.ORG on your host as follows for example? % dig WWW.DeleGate.ORG % nslookup WWW.DeleGate.ORG If you can immediately get responses for these, the problem is in DeleGate
  11/25-05:56 . 4673 (Yutaka Sato) [54]
  Hi Fred, If you have the core file remaining, then the stack trace of it will give us an important hint where it died. % mdb src/dg.exe core Or if you can reproduce the "Bus Error" with "src/dg.exe
delegate problem with X11
  11/26-01:02 . 4674  carine castillon <> [33]
  Dear Yukata, I'm using delegate 9.9.4 and I have a problem with telnet/x11. I use the "x server" option to open display during a telnet connection. After few minutes without using the session, the d
  11/26-05:48 . 4675 (Yutaka Sato) [43]
  Hi, I don't see the reason but the log around the above one, without "-vt" option will explain what was happend. And you are recommended to use DeleGate/9.9.6-pre2 or after in which you can disable
  11/26-08:26 . 4676 (Yutaka Sato) [52]
  Hi, As long as I know, this "No permission" error occurs only when a new X client at host [x.x.x.x] tried to connect the X proxy[b.b.b.b] not from the host[c.c.c.c] to which you did login via Telnet
Vstr overflow in Dg 9.9.5 sftp.c
  11/26-21:10 . 4677  Vijay Pandit <> [74]
  Hi Yutaka, I am running Delegate 9.9.5 on Slackware as a FTP to SFTP gateway (reverse proxy for SFTP server).The SFTP server directory has a large number of text files (about 16000), each around 15K
  11/27-08:55 . 4678 (Yutaka Sato) [38]
  Hi, Hmm... It seems caused by timeout of 3 seconds. I'll modify it as the following patch (in 9.9.6-pre8 or 9.9.6) Cheers, Yutaka 9 9 Yutaka Sato <> (
  11/30-10:37 . 4679  Vijay Pandit <> [34]
  Hi Yutaka, Applied the supplied patch on sftp.c and recompiled - displays the listing OK now   Cheers   Vijay ___ Win 1 of 4 Sony home entertainment packs thanks to Yahoo!7. Enter now: http://au.doc
DeleGate/9.9.6 (STABLE) -- building without C++
  12/01-16:18 . 4680 (Yutaka Sato) [88]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: DeleGate/9.9.6 (STABLE) -- building without C++ This release includes fixes to make DeleGate version 9 more sta
Bad Request with SNI
  12/02-02:25 . 4681  "Bernhard Rauh" <> [227]
  Dear Yutaka, I'm using a delegate-proxy as a certificate-gateway: delegated SERVER=http -P9090 MOUNT="/**" FSV="sslway -cert cert.pem -pass pass:password" HTTPCONF="ver:1.0
  12/02-03:05 . 4682 (Yutaka Sato) [54]
  Hallo, Thank you for your notice. With TLSCONF=-vd option, I confirmed that DeleGate sends the value of Host: field in HTTP request from a client. For a while, the enclosed patch will be useful to e
  12/02-17:10 . 4683  "Bernhard Rauh" <> [325]
  Hallo Yutaka, below the logfile from the test with the parameter TLSCONF=-vd. At the client-browser the message "Bad Request - Your browser sent a request that this server could not understand." wil
  12/02-17:18 . 4684 (Yutaka Sato) [41]
  Bernhard, Did you applied the patch? And what you will get if without the SSLTUNNEL=... option? Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Instit
  12/02-18:20 . 4685  "Bernhard Rauh" <> [128]
  Hallo Yutaka, no - sorry! I've oversight, but now after input make: /usr/bin/make -f Makefile.go libcfi.a SHELL="/bin/sh" HDRDIR="-I../gen -I../include " make[4]: Entering directory `/root/delegate/
  12/02-18:25 . 4686 (Yutaka Sato) [27]
  Hallo Bernhard, The above line must be "*/". I could not reproduce the problem with the regardlress of with/without the patch and SSLTUNNEL... Cheers, Yutaka 9 9 Yutaka Sato <y.sato
  12/02-19:27 . 4687  "Bernhard Rauh" <> [59]
  Hello Yutaka, it works! The hostname "" is a pseudonym, which I replaced only for config and the logfile in this forum. CHEERS! Bernhard ---Ursprngliche Nachricht--- Von: Yutaka Sato
dynamic log level contol (Re: Process control)
  12/02-21:31 . 4688  Sebastien Barbereau <> [52]
  Hello, thanks for the information. I saw that the new release came out and will try with it. cheers, Seb
Bad Request with SNI
  12/03-14:31 . 4689 (Yutaka Sato) [26]
  Hallo, I see. I uploaded 9.9.7-pre1 which includes the modification and more. With the version, the virtual host name specified in a MOUNT option is used for SNI too, for example: MOUNT="/x/* https:
Delegate SSL <-> delegate <-> ftp server
  12/09-15:56 . 4690  "Hanard Xavier (DTSBE)" <> [207]
  I've tried with the Master, Proxy, tcprelay solution but i can't establish this communication the way i'd like to. My e-mail address has been harmonized into ! Please remember to update y
  12/09-17:42 . 4691 (Yutaka Sato) [29]
  Hi, As long as I remember, in the last two years there were at least three fixes about SSLway for FTP (control and data connection): SSL session cache problem, shutdown of data connection, and the n
  12/09-18:32 . 4692  "Hanard Xavier (DTSBE)" <> [124]
  Yutaka, Here's the output from a "make CC=g++" ld: 0711-317 ERROR: Undefined symbol: .fork() ld: 0711-317 ERROR: Undefined symbol: .wait4(int, int*, int, void*) collect2: ld returned 8 exit status m
  12/09-18:32 . 4693  "Hanard Xavier (DTSBE)" <> [127]
  Complete suite of symbol: ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information. ld: 0711-317 ERROR: Undefined symbol: .bcopy(void const*, void*, unsigned long) ld: 0711-317
  12/09-18:48 . 4694 (Yutaka Sato) [67]
  Hi, Doing the make without g++ (C++) might make your problems simpler. I enclosed the message I wrote two weeks ago. Cheers, Yutaka 9 9 Yutaka Sato <>
  12/09-19:04 . 4695  "Hanard Xavier (DTSBE)" <> [123]
  I've try but this give this: /delegate995/delegate9.9.5> make -f Makefile cc -DMKMKMK -DDEFCC=\"cc\" -I../gen -I../include -O -L../lib mkmkmk.c -o mkmkmk.exe cc: installation problem, cannot exec `c
  12/09-19:14 . 4696 (Yutaka Sato) [30]
  Hi, You should be the one who know where cc1 program is and why it is not found. For example, you will be able to test it as this: % echo "main(){}" > x.c % cc x.c If your gcc enviromnet is appropri
  12/09-19:19 . 4697  "Hanard Xavier (DTSBE)" <> [76]
  Ok, my way was good... But it don't fix the problem. I've already tried with a make CC=gcc The compilation failed with the same errors as "CC=g++" The test you suggest fail too: for this point i've
  12/09-20:19 . 4698 (Yutaka Sato) [42]
  Hi, Sorry, I could not what was your result. Did this work without problem? If so, I cannot understand the reason of the error about unknown "cc1". Did you do it from the clean source? Did you tried
  12/09-20:21 . 4699  "Hanard Xavier (DTSBE)" <> [82]
  Yutaka, Now the cc1 problem is solved, was something about path managing into the profile. I always tru from a clean source (make clean) I'll try to change de DELEGATE_CONF as you mention and come b
  12/09-20:43 . 4700  "Hanard Xavier (DTSBE)" <> [193]
  Hanard Xavier IT System Engineer @ Dexia Technology Services Network Security - Identity Management Tel: +000000000f Gsm: +3000000000F SecureEDI Public Folder E-Mail: E-mail: xa
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:01/22 09:55:22 (5 sec) Expires:01/22 15:55:17 @_@V