Articles delegate-en/4321-4362 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 4321 - 4362   digest:
  01/02-20:04 . 4321  "arun menon v" <> [30]
  HI I tied to install delegate. when i used the command gzip -d < delegate9.9.0.tar.gz | tar xfv folllowing error came . tar: Old option `f' requires an argument. Try `tar --help' or `tar --usage' fo
  01/02-20:54 . 4322 (Yutaka Sato) [28]
  You can to do it with "tar xfv -". But I strongly recommend you to use the binary distribution, "linux-dg.gz" for Linux, at the following directories:
  01/03-14:23 . 4323  "arun menon v" <> [111]
  HI Yutaka, How to install delegate using this binary version.please advice. I downloaded delegate9.9.0.tar.gz file,and installed it using tar -zxvf delegate9.9.0.tar.gz. and i changed the directory
Cannot list upper level file/directory
  01/05-21:12 . 4324  "WONG, Wai Bun Ada" <> [126]
  Hi Yutaka, I can change to upper level directory when I use the following "my new setting". For easy reference, below is my old and new setting. My old setting (cannot change to upper level director
can delegate work with hardware SSL accelerators
  01/06-00:58 . 4325  "Iyengar, Sunil" <> [151]
  Hi, I am currently working on a project of using delegate reverse proxy. Does it support SSL hardware accelerators? Regards Sunil Iyengar IT/IS Security Consultant ___ Logica Keats House The Office
  01/06-13:39 . 4326 (Yutaka Sato) [16]
  Hi, I'm interested in it but it's not supported yet. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advanced Industrial Science and Tech
Cannot list upper level file/directory
  01/06-13:45 . 4327 (Yutaka Sato) [15]
  Hi, I hope you to read my former message and answer my questions, please. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advanced Indust
  01/06-16:48 . 4328  "WONG, Wai Bun Ada" <> [256]
  Hi Yutaka, Thanks for your message. I am sorry that I haven't answered your questions in my last posting because the hidden file problem is solved. Below is my answer. My ftp client is FileZilla (ve
  01/06-19:16 . 4329 (Yutaka Sato) [43]
  ok. I already wrote the answer, the reason why "upper directories" can not (must not) be shown to clients: The path in a URL for FTP protocol (ftp://server/path) means the relative path from the hom
how to configuer
  01/07-13:48 . 4330  "arun menon v" <> [17]
  Hi i downloaded delegate and i done make. Then whts next step to configure delegete.kindly reply.I am using fedora 8
  01/07-16:26 . 4331 (Yutaka Sato) [18]
  So what was your problem? You are recommened to read the short tutorial and examples in <URL:> Cheers, Yutaka 9 9 Yutaka Sato <> http:
Cannot list upper level file/directory
  01/07-17:00 . 4332 (Yutaka Sato) [25]
  Hi, I added "logindir" option for FTP MOUNT and uploaded the modified version as You can use it as follows: MOUNT="/* sftp://server/%2F* login
  01/07-17:25 . 4333  "WONG, Wai Bun Ada" <> [41]
  Hi Yutaka, Thanks for your information. I will download and test the mount option. Thanks. ---Original Message--- From: Yutaka Sato [] Sent: Wednesday, January 07, 2009 4
how to configuer
  01/07-17:41 . 4334  "arun menon v" <> [127]
  HI when i gave make command i got the following output.some error came.please also tell what to do after giving make command.I am not interested in squid thats why i rely on delegate.Kindly reply. s
Cannot list upper level file/directory
  01/07-18:10 . 4335 (Yutaka Sato) [26]
  Maybe it is because you missed the space between "-cert" and "/etc/..." in your "new setting". And the recommended way to use your own certificate in DeleGate ver.9 is putting it with name "me.pem"
Few questions about transparent proxy & srcif
  01/08-01:12 . 4336  "Master NoSFeRaTU" <> [60]
  Hello. I want to ask a few questions: Q1) I spend some time to search in mail-archives, but can't find how to setup a squid-like transparent proxy(http_port transparent). I'm using fr
  01/08-13:06 . 4337 (Yutaka Sato) [37]
  Hi, "odst.-" requires SO_ORIGINAL_DST option of setsockopt() and it is enabled maybe only on Linux. It is hardcoded as follows in "nbio.c". rary/nbio.c: As this code shows, it irequires SOL_IP and E
Cannot list upper level file/directory
  01/08-18:00 . 4338  "WONG, Wai Bun Ada" <> [48]
  Hi Yutaka, Yes, you are correct. I can use my own cert now. Thanks ---Original Message--- From: Yutaka Sato [] Sent: Wednesday, January 07, 2009 5:11 PM To: feedback@dele
Few questions about transparent proxy & srcif
  01/09-02:12 . 4339 (Yutaka Sato) [95]
  Hi, I noticed that maybe FreeBSD does not support SO_ORIGINAL_DST, but instead (?) it substitutes the result of getsockname() with the destination host and port. I feel it unbelievablly xxxy ;) beca
  01/09-04:44 . 4340 (Yutaka Sato) [149]
  This is bad because a proxy will cause loop when a transparent-proxy is used also as a non-transparent-proxy and if the getsockname() returns the entrance port of itself (to be used as the destinati
  01/09-17:48 . 4341 (Yutaka Sato) [33]
  Hi, I should have written that on MacOSX I saw another problem of getsockname() when I added two or more "ipfw fwd". It resulted in failure even with the socket to be used for accept() and left an e
  01/11-04:26 . 4342  "Master NoSFeRaTU" <> [191]
  2009/1/8 Yutaka Sato <>: Seems as kernel rebuilding with "options IPFIREWALL_FORWARD" required. Thanks. I patched 9.9.0 with attached patch & confirm that transparent proxy now
  01/11-05:02 . 4343  "Master NoSFeRaTU" <> [30]
  2009/1/10 Master NoSFeRaTU <>: I added what I want with patch like this: diff -ur delegate9.9.0.orig/src/inets.c delegate9.9.0/src/inets.c --- delegate9.9.0.
  01/11-14:41 . 4344 (Yutaka Sato) [55]
  Hi, I know it since I searched what does the error message implies, but I don't know how to enable the option in the kernel. If I need some recompilation or so, I will not try it because I don't lik
  01/12-07:10 . 4345  "Master NoSFeRaTU" <> [75]
  2009/1/11 Yutaka Sato <>: Unfortunately this feature can be enabled only via kernel recompilation, like that: cp /usr/src/sys/i386/conf/GENERIC /usr/src/sys/i386/conf/ournewkern
DeleGate/9.9.1 (STABLE) -- new stable version
  01/22-14:49 . 4346 (Yutaka Sato) [92]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: DeleGate/9.9.1 (STABLE) -- new stable version This release includes many minor fixes to make DeleGate ver.9 sta
Linux Testing and Delegate
  01/22-22:10 . 4347  "Stuart Foster A" <> [67]
  Yutaka, Whilst performing some preliminary testing of the Linux kernel on a machine that also has instances of delegate 9.7.7 running (http proxy and dns server) I observed the following wa
dynamically selected SERVER parameter
  01/23-02:55 . 4348  Jens-Erik Hansen <> [27]
  Hello, I try to setup delegate as a reverse proxy for http. The server parameter should be dynamically selected by the destination host. In other words: the hosts "" and "
  01/23-06:40 . 4349 (Yutaka Sato) [31]
  Hi, It seems an interesting idea to use SERVER for "reverse proxy" but you should read documents about "reverse proxy" by DeleGate. <URL:> <URL:
Few questions about transparent proxy & srcif
  01/23-17:16 . 4350 (Yutaka Sato) [55]
  I'm using nearly 30 operating systems including 4 versions of FreeBSD, just for building and testing DeleGate on each platform, but I'm not a real "user" of any specific operation system. Thank you.
  01/23-18:36 . 4351 (Yutaka Sato) [86]
  Hi, In DeleGate/9.9.2-pre1, I'll change the code as the enclosed patch. It introduces a generic prefix in form "" for name or address. For example, you can use it as follows: SRCIF=_-Dont
rewrite GET for "/" URLs
  01/25-03:49 . 4352  "jon.hart" <> [15]
  Hi, at the moment I use delegate as a reverse proxy for a database application. Dependent on the accessed name- based-virtual-host the user reach his database. The database is selected by a "?query"
  01/25-12:02 . 4353 (Yutaka Sato) [26]
  I don't know why you need to reduce it so but it might be useful to add "moved" option to the MOUNT for "/" to automatically redirect the request. MOUNT="/ nvhost=user1.
  01/25-12:10 . 4354 (Yutaka Sato) [19]
  Sorry, the MOUNT with "moved" option will generate the specified URL as is, thus it should be as this: MOUNT="/,moved" Cheers, Yutaka 9
Few questions about transparent proxy & srcif
  01/26-16:27 . 4355  Master NoSFeRaTU <> [90]
  2009/1/23 Yutaka Sato <>: I have multigateway router with connections to different providers, which have private subnets with equal addresses. These connections are quite instab
  01/26-17:04 . 4356 (Yutaka Sato) [49]
  Hi, Thank you. It seems to happen when a specified host (address) is not (inversely) resolvable. I've started apllying the "" to multiple purposes to control outgoing connection (ex. ti
  01/26-18:19 . 4357  Master NoSFeRaTU <> [7]
  2009/1/26 Yutaka Sato <>: I confirm, now all works fine. Big thanks ^_^
nvhost to nvserv STLS with different certificates
  01/27-07:19 . 4358  Jens-Erik Hansen <> [50]
  Hi Yutaka, I'm working on a name-based virtual hosting to name based virtual servers setup which works fine now. The next task is to establish a ssl connection between the client and delegate where
  01/27-07:40 . 4359 (Yutaka Sato) [40]
  To switch amoung multiple certificates, you need "server name indication" (SNI) supported after OpenSSL0.9.8g or laters, and need to put a certificate for each destination site at "CERTIDR" (DGROOT/
Thanks for your Universal Proxy server - Delegate!
  01/27-22:51 . 4360  Ruslan <> [13]
  Thanks for your Universal Proxy server - Delegate!
delgate 9.7.7 ftp to sftp proxy and file size
  01/30-13:46 . 4361  James <> [30]
  Hi, I modified src/sftp.c as indicated in one of the posts and changed DATA_MAX to static int DATA_MAX = 1024*1024*1024 which works fine for ftp PUT and GET for files up to 1GB however if i try to i
  01/31-20:00 . 4362 (Yutaka Sato) [48]
  Hi, "int" means the signed integer of 32bits with the max value 2GB-1. The limitation will be able to be enlarged by replacing "int" with "FileSize" as this: static FileSize DATA_MAX = 16*1024*1024*
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:02/23 07:11:03 (2 sec) Expires:02/23 13:11:01 @_@V