Articles delegate-en/4000-4040 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 4000 - 4040   digest:
ftp/tls +PASV +NAT
  06/12-04:56 . 4000  Darin Perusich <> [34]
___ Hello, I've read a few post on the mail-list about ftp/ssl connection timeouts when trying to establish passive connections to an ftp/tls server behind a firewall, though I don't believe these addre
  06/15-18:14 . 4001 (Yutaka Sato) [45]
___ First, if possible, you shoud setup your client to use EPSV instread of PASV. Unlike PASV, the EPSV response does not include the address of the FTP server but only shows the port number, like "229
  06/17-05:14 . 4003  Darin Perusich <> [28]
___ The server I'm connecting to doesn't support EPSV mode so this won't work. They are running a rather old version of WS_FTP. I tried setting this but it didn't make any difference, the connection sti
  06/17-10:06 . 4004 (Yutaka Sato) [63]
___ The command for data-connection establishment is hop-by-hop thus the command with the server is independent from the one with the client. For example, it can be EPSV with client and PASV with the se
delegate 9.7.7 and io timeout
  07/03-10:48 . 4005 [37]
___ Hello, At first, Many thanks for your great product! Few days ago, I updated delegate from 8.5.9 to 9.7.7. Then I found that ftp timeout (TIMEOUT=io:0) seems not working correctly. In delegate log ,
  07/03-15:41 . 4006 (Yutaka Sato) [48]
___ Hi, I confirmed FTP-DeleGate acts like you described since 9.2.2-pre1 in which I supported the abortion of the data transfer on FTP (ABOR command). It must be called a bug and will be fixed as the e
pop / imap mounting problems
  07/14-21:07 . 4007  "Soenke J. Peters" <> [32]
___ Hi, I tried your delegate proxy as a protocol translator between pop3/imap4 and http. When using delegated -v -P8080 SERVER=http MOUNT="/mail/* imap://*" and trying to access http:/
Proxying sftp client to ftp sever (SERVER=sftp)
  07/14-23:12 . 4008  "Jean Aumont" <> [185]
___ Hi, I am currently looking to proxy an sftp client to an ftp server. From my research on the "Delegate" mailing list, article: it seem that this
pop / imap mounting problems
  07/15-13:23 . 4009 (Yutaka Sato) [34]
___ Hi, IMAP over HTTP is not supported. You can suppress the intepretation of "@" in username or password in the Basic authentication by escaping it to "%40" with the following option. HTTPCONF=passesc
Proxying sftp client to ftp sever (SERVER=sftp)
  07/15-15:07 . 4010 (Yutaka Sato) [29]
___ Hi, Unfortunately, DeleGate does not support it. I don't know what is better in sftp than ftp... If you need encryption or verification of data transfer over FTP, you can wrap FTP with SSL (using De
delegate code modification question
  07/17-20:50 . 4011  "Jeff Hinds (JAS)" <> [199]
___ Good day, I am trying to make a small change to your code to serve a certain purpose on our use of delegate. Basically, I want it to append a short string to the username during NNTP authentication
DeleGate/9.8.2 (BETA) -- porting to Windwos CE, name based reverse proxy
  07/18-21:31 . 4012 (Yutaka Sato) [82]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: DeleGate/9.8.2 (BETA) -- porting to Windwos CE, name based reverse proxy In this release, DeleGate has been por
DeleGate/9.8.3 (BETA) -- fixes for name-based MOUNT and dial-up for DNS
  07/22-07:50 . 4013 (Yutaka Sato) [36]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: DeleGate/9.8.3 (BETA) -- fixes for name-based MOUNT and dial-up for DNS This release fixes name-based reverse p
customization builtin messages and icons.
  07/23-12:35 . 4014  "David Wang" <> [149]
___ Hi Yutaka, According to the manual about customization from website, we are trying to customize those builtin messages without recompiling DeleGate by defining: MOUNT="/-/builtin/*
Testing the HTTP/HTTPS and FTP Delegate proxy
  07/26-03:04 . 4015  "Jean Aumont" <> [86]
___ Hi Yutaka, I am currently doing some tests on proxy software and I am trying to set-up 2 proxies, one that support Http/Https and the other that support FTP. I have decided to test the "Delegate" pr
  07/26-05:00 . 4016 (Yutaka Sato) [69]
___ Hi, Firstly, DeleGate selects one AUTHORIZER based on the set of destination protocol, the destination server and the client of the current session. Then the AUTHORIZER is applied to authenticate (a
customization builtin messages and icons.
  07/28-17:16 . 4017 (Yutaka Sato) [74]
___ Hi, You are recommended to test it with a simple configuration as this: [the content of http://localhost:8080/builtin/mssgs/404-notfound.dhtml] XXXX not-found XXXX ... cutomized not-found message [D
Testing the HTTP/HTTPS and FTP Delegate proxy
  07/28-21:56 . 4018  "Jean Aumont" <> [126]
___ Hi Yutaka, Thanks for your prompt response on Question 1. It is exactly what I was looking for. I wish you would had answer the second Question also. You probably just missed it since my email was s
customization builtin messages and icons.
  07/29-10:24 . 4019  "David Wang" <> [256]
___ Hi Yutaka, I did a test as you suggested, it seems working fine, and the log is as below: 07/29 10:21:07.51 [29415] 0+0: arg[4] MOUNT=/-/builtin/* http://localhost:8080/delegate/builtin/* 07/29 10:2
Testing the HTTP/HTTPS and FTP Delegate proxy
  07/29-16:31 . 4020 (Yutaka Sato) [70]
___ Hi, You are asking somewhat unsupported or unspecified feature rathar than a bug. The AUTHORIZER parameter, if not used as a MOUNT option, is for a DeleGate as an origin FTP server not as a FTP prox
customization builtin messages and icons.
  07/29-19:51 . 4021 (Yutaka Sato) [48]
___ Hi, You seem using old version of DeleGate as HTTPS server which could be heavy and slow in HTTPS/SSL gateway. Anyway it seem that MOUNT for /-/builtin/ does not work with HTTPS even in the current
Testing the HTTP/HTTPS and FTP Delegate proxy
  07/29-22:08 . 4022  "Jean Aumont" <> [259]
___ Hi Yukata, Thanks again for your response. My goal is to create a configuration file for the Delegate ftp proxy server that can support 3 requirements: 1) Acess a specific FTP server without UID/PWD
  07/30-00:44 . 4023 (Yutaka Sato) [72]
___ Hi, As I wrote, DeleGate as a FTP proxy does not support AUTHORIZER which are not in MOUNT option. In short, in FTP proxy, the destiantion The enclosed patch is a very tentative implementation of it
  07/30-08:45 . 4024 (Yutaka Sato) [62]
___ Hi, Here is an another solution. Your AUHTORIZER parameters can be unified into a single one as this: AUTHORIZER="-list{u1:p1,u2:p2},-list{u1,u2}(-reject.badpass),-any(others)" In the first -list, u
customization builtin messages and icons.
  07/30-09:54 . 4025  "David Wang" <> [79]
___ Hi Yutaka, Our current verison is 9.1.1, what did you mean this version "could be heavy and slow in HTTPS/SSL gateway"? Can I have its details? And if we'd like to MOUNT /-/builtin with https, which
  07/30-15:39 . 4026 (Yutaka Sato) [27]
___ See the home page of DeleGate, especially the release information as <URL:> The current stable version is, as announced in the home page, 9.7.7 but
Use the same outgoing IP address as the incoming IP address
  07/31-05:12 . 4027  Sorin Esanu <> [12]
___ Hello, I run delegate (http proxy)on a multihomed linux server. Although delegate listens to all ips, the outgoing ip is always the main ip of the computer. Is it possible for delegate to use as out
  07/31-05:53 . 4028 (Yutaka Sato) [22]
___ Why you need to do so? As long as I underdstand, an application program like DeleGate can't select the route to the destination server. You can select the source address of an outgoing connection by
  07/31-06:23 . 4029  Sorin Esanu <> [36]
___ Those 3 ips have different routes to world wide internet. So the application program does not have to select anything in respect to routes to destination servers. This is done by the hardware that r
  07/31-07:50 . 4030 (Yutaka Sato) [65]
___ Wow, do you really have such number of interfaces on a machine? With the enclosed patch, you can use the following options to bind the source address of an outgoing connection to the address of inco
Testing the HTTP/HTTPS and FTP Delegate proxy
  07/31-22:01 . 4031 (Yutaka Sato) [26]
___ Hi, I uploaded 9.8.3-pre3 including the above extension and yet another extension which is recommended. It is "-fail.badpass" to be used as follows: AUTHORIZER="-list{u1:p1,u2:p2},-fail.badpass,-any
  07/31-22:24 . 4032  "Jean Aumont" <> [43]
___ Thanks a lot for this. I will be trying it shortly. Thanks again. Jean Aumont ---Original Message--- From: Yutaka Sato [] Sent: Thursday, July 31, 2008 9:01 AM To: feedba
  07/31-22:47 . 4033 (Yutaka Sato) [17]
___ Sorry, it is 9.8.4-pre3. You can get it at Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Ad
Use the same outgoing IP address as the incoming IP address
  08/01-03:07 . 4034  Sorin Esanu <> [76]
___ Not on this one I run delegate. But I have one with more than 300 ips, on a single real interface... Seems like this patch is working. I will test more and give some feedback. Thanks!
  08/01-09:26 . 4035 (Yutaka Sato) [28]
___ Hi, Ah, you meant non-real interafces. I see. I uploaded 9.8.4-pre3 including the patch and a little fix to be applied with it. It is for stopping reusing keep-alive to the server between clients of
NNTP-Delegate will not cache in Linux
  08/03-05:04 . 4036  Jeff <> [119]
___ Hi, I have been struggling for a week now with NNTP-Delegate. Everything works great and as expected except for caching. It just does not seem to work. I have tested under Fedora and a new version o
  08/03-08:22 . 4037 (Yutaka Sato) [49]
___ Hi Jeff, Thank you for your information. I tested a caching NNTP proxy by DeleGate on Fedora and saw a cached article never reused. In my case I saw a error message in LOGFILE as "### malformed arti
  08/04-04:31 . 4038  Jeff <> [143]
___ Hi again, Thanks for your response. Makes sense. Though I have not picked up that same error message in my logs but perhaps I am just not seeing it in amongst everything else. I have modified the co
  08/04-06:26 . 4039 (Yutaka Sato) [65]
___ Hi, If you see "islocal = 1" after "newServer = nntp://server" in your LOGFILE, it is the reason why the cache is disabled. DeleGate suppresses caching of articles from a local newsserver (a server
filtering between http and raw sockets communication on single port
  08/04-08:13 . 4040  jan de vries <> [35]
___ Hello, I have be trying and searching for hours but still no succes. I want to be able to filter the incomming traffic on my server. All http traffic has to be forwarded to webserver on port A and a
Empty-Articles = [4002]
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:04/04 13:56:32 (2 sec) Expires:04/04 19:56:30 @_@V