I am not aware of any minibsd images for vmware, but I haven't really
looked very hard for them either.
I am using a FreeBSD install on vmware workstation to produce image
files that can be copied via "dd" to a compact flash or USB flash disk.
I should have a good image later this week. I'll try to create a new vm,
boot it from the flash drive and then dd back to a partitioned and
labeled virtual disk. If that works I'll put the vmware image up on my
ftp server for you.
Or, if you have a flash drive I can generate a disk image for that and
you could boot right from that. I just need to know how many sectors are
on your flash disk. The minibsd image is around 8 MB.
From: Yutaka Sato [mailto:firstname.lastname@example.org]
Sent: Monday, June 18, 2007 2:44 AM
Cc: Joe Moore
Subject: Re: [DeleGate-En:3759] minimum neccessary libs
In message <_A3759@delegate-en.ML_> on 06/16/07(08:24:59) I wrote:
|you "Joe Moore" <email@example.com> wrote:
| |I have successfully built and run delegated on FreeBSD 6.2-stable. I
| |built from the ports collection and it runs on a "typical" FreeBSD
| |I am now trying to get it to run in a "minibsd 6" installation (a
| |stripped-down FreeBSD 6.2 "minimum" install) that boots from a flash
| |disk. I get error messages about missing libs and "unable to link to
| |openssl libs". I've copied over the missing files that were
| |named in the error messages but I still seem to be missing
| |Would it be possible to get a list of the required libs? Or, is
| |way to build the port statically linked?
|You should be able to do it with the ldd command if it is not
By the way, could you tell me the easiest way to run minibsd on a
machine server? I have VirtualPC, Parallels Desktop and VMWare thus
if there is an ISO image of a minibsd it'll so easy to test it for me.
9 9 Yutaka Sato <firstname.lastname@example.org> http://delegate.org/y.sato/
( ~ ) National Institute of Advanced Industrial Science and Technology
_< >_ 1-1-4 Umezono, Tsukuba, Ibaraki, 305-8568 Japan
Do the more with the less -- B. Fuller