Articles delegate-en/3693-3725 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 3693 - 3725   digest:
DeleGate/9.5.5 (STABLE) -- fixes for FTP data-connection, name resolution, etc.
  04/03-16:19 . 3693 (Yutaka Sato) [56]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: DeleGate/9.5.5 (STABLE) -- fixes for FTP data-connection, name resolution, etc. This release includes fixes for
Sub-Process turns to a zombie when using Delegate as an SMTP proxy
  04/04-12:03 . 3694 (Yutaka Sato) [76]
  Hi, Your log shows that it is not in SSL mode. The STARTTLS capability is announced in the EHLO response, but is not used. It is not changed to SSL. This can occur when the client disconnected in th
  04/04-22:19 . 3695  "Petros Skalkos" <> [391]
  Hello Yutaka, Thank you for the reply I have downloaded v 9.6.0 pre7 Command Line: win-dg STLS=-fcl -P25 -vd SERVER=smtp:// PERMIT=smtp:*:* I got the log line
  04/05-09:06 . 3696 (Yutaka Sato) [53]
  Hi, This line shows the size of the message data, estimated by the client, is about 570Kbytes. This line shows the speed of data transfer from the client is very slow (25320 bytes / 77 seconds = 300
Performance on Windows
  04/05-09:54 . 3697  Ed Vander Hoek <> [22]
  Hello everyone, I'm experiencing some rather low performance on Windows 2003 and I'm hoping you can help me solve it. I'm using the following command line: win-dg -P9015 SERVER=tcprelay://localhost:
  04/05-10:13 . 3698 (Yutaka Sato) [33]
  Hi, The time-stamps in the logfile of DeleGate will be helpful to see where is the bottle-neck. Detailed log can be obtained with -vd option as follows: Cheers, Yutaka 9 9 Yutaka Sato <y.sato@delega
DeleGate/9.5.6 (STABLE) -- fixes for MITM and JP char. code conv.
  04/05-17:02 . 3699 (Yutaka Sato) [40]
  Dear DeleGate users, I inform you of the new release of DeleGate available as follows: DeleGate/9.5.6 (STABLE) -- fixes for MITM and JP char. code conv. This release includes minor fixes for MITM an
Performance on Windows
  04/06-05:49 . 3700  Ed Vander Hoek <> [26]
  To summarize the log file: 150ms: initialize connection 100ms: CFI_SYNC 260ms: init SSLWAY 250ms: actual relay 110ms: shutdown connection Total: 870ms I can send you the 17Kb log file if you want to
  04/06-21:29 . 3701  "Surya 69" <> [24]
  hi there, i want to join ur forum. i have tried to install delegate 9 in windows xp.. as per instructions given on site.. but i got the message in console.. that your delegate has initialize but i c
Performance on Windows
  04/06-22:58 . 3702 (Yutaka Sato) [34]
  Hi, Ooops, it seems too slow :) I also made similar observation on my machine and saw the latency about 500ms. In DeleGate/9.6.X, I'm re-implementing built-in filters including Gzip and SSL based on
  04/08-08:21 . 3703  evh1001 <> [14]
  Thanks Yutaka, that sounds very promising. Any idea when 9.6.1 might be released? Thanks, Ed.
  04/08-08:56 . 3704 (Yutaka Sato) [25]
  The preliminary implementation of thread based SSL just for STLS=fcl (or for FCL=sslway) was released the day before yesterday and is available at the above location as 9.6.0-pre9. 9.6.1 will be aft
please send me admin e mail id to install delegate 9 in ubuntu
  04/10-19:21 . 3705  "Surya 69" <> [19]
  -- please send me ADMIN info to use delegate i am a pg student at iiitmk kerla, India,,, waiting for positive reply KEEP SMILING... SURYA69...
HTTP keep-alive questions
  04/13-23:07 . 3706  "lhwork" <> [26]
  Dear Yutaka, I'm testing Delegate v9.5.6 on Windows with Firefox. My main Delegate settings: -P8080 SERVER=http HTTPCONF=kill-qhead:Via CACHE=no RESOLV=dns Firefox sends the next HTTP headers to Del
  04/15-08:16 . 3707 (Yutaka Sato) [41]
  Hi, Connection, Proxy-Connection and Keep-Alive are "hop-by-hop" headers which MUST NOT be forwarded. Connections are kept-alive by default in HTTP/1.1 without these headers, and Keep-Alive and Prox
I can't understand why DeleGate not work for me under windows
  04/17-19:02 . 3708  thomas anderson <> [73]
  As i wrote in the subject: I can't understand why DeleGate not work for me under windows by the command line i start: delegated -P8080 SERVER=http -v ADMIN=you@your.. delegated start but when i try
Questions about SSLway
  04/17-19:34 . 3709  "Kwis Angelo" <> [171]
  Hello Yutaka, I have been running Delegate for the past few days. However, there are some instances where I cannot establish a session with the HTTPS site. The console logs show this error: 5684:err
  04/18-02:16 . 3710 (Yutaka Sato) [46]
  Hi, Do you mean it succeeds SSL at the beginning till the error? How oftern does it occur? You can see more detailed log of SSLway in the negotiation phase with the following option: TLSCONF=-vd And
  04/18-17:40 . 3711  "Kwis Angelo" <> [765]
  Hi Yutaka, I have the logs below after disabling session cache and allowing the negotiation phase logging. I tried several times. The first one (highlighted in blue) was able to do establish a sessi
  04/18-19:55 . 3712  "Kwis Angelo" <> [1055]
  Hi Yutaka, I did a snoop and found some difference with how packets are transmitted during the negotiation phase between the client and server. I attached the snoop output file for your reference. I
  04/18-22:51 . 3713 (Yutaka Sato) [54]
  Hi, The session cache seems not disabled because you did TLSCONF="-vd, scache:no" istead of TLSCONF="-vd,scache:no" as the log shows: If the above does not take effect, disabling xcache might be eff
  04/19-09:21 . 3714 (Yutaka Sato) [51]
  Chris, I could reproduce the problem with SSLway with "-ssl2" option and confirmed it can be escaped with TLSCONF="scache:no" option. I'll fix it as the enclosed patch which will be applied to the n
  04/19-12:48 . 3715  "Kwis Angelo" <> [114]
  Oh thank you very much! Its working now, really appreciate your help on this :-) One more question...Im trying to print out the console logs to a I piped it to a file using the command line
  04/22-04:18 . 3716 (Yutaka Sato) [32]
  Hi, Stop using "-v" option which force logs to be put onto the console. Cheers, Yutaka 9 9 Yutaka Sato <> ( ~ ) National Institute of Advanced Industri
TLS problem... where am I going wrong?
  04/22-22:22 . 3717  Ron Hackett <> [38]
  DeleGate lists the exact feature I'm looking for... but I can't get it to work. :( Is there a support forum, mailbox, IRC channel where DeleGurus hang out? I'd love to get this up and running but I
sockmux authorizer
  04/23-07:39 . 3718  Martin Papadopoulos <> [30]
  hello yutaka, using delegate as an sockmux server with authorizer="-list{user:pw}" does not work from a client with myauth="user:pw" . it looks like the authorization is established as anonymous@hos
  04/23-08:14 . 3719 (Yutaka Sato) [36]
  Hi, Why do you think so? It seems working as follows: (server-side) % delegated -v -P9999 SERVER=sockmux AUTHORIZER="-list{u:p}" {S}03:18.716 ### Encryption start for incoming comm. [2](4)/2 {S}03:1
  04/23-08:37 . 3720  Martin Papadopoulos <> [73]
  Yutaka Sato schrieb: at first sight , i thought so too, but change the password on the client side intentionally to a wrong password , and the authorization still is valid allthough the password is
Unknown UDP ports
  04/23-18:39 . 3721  Peter Rabbitson <> [42]
  Hi, I am successfully running delegate, no problems no issues (I am also aware that there is a new version, have not upgraded yet). However besides binding on the 8080 pot as requested, delegate bin
  04/23-22:19 . 3722 (Yutaka Sato) [42]
  The UDP ports are for the DNS resolver of DeleGate. You can see where it is created in the LOGFILE with the following option: RES_DEBUG=-1 For examplle as this: 04/23 21:56:11.92 [8802] 0+0: {R} RES
  04/24-20:53 . 3723  Peter Rabbitson <> [33]
  Yes, this works. Just of curiosity, why the default order of RESOLV gives higher priority to 'dns' as opposed to 'sys'? Is there a certain rationale behind doing own dns queries instead of asking th
SSL -CApath not working
  04/26-21:39 . 3724 [19]
  Hello, I would like to get a confirmation if the option [-CApath dir] not working, while trying to do client authentication. The option [-CAfile file] works like a charm ../delegated -P2121 SERVER=f
  04/27-13:44 . 3725 (Yutaka Sato) [26]
  Hi, You need name the hashed file as "18c82eb5.0" to use it with -CApath and nowadays it's recommended to make it automatically with the "c_rehash" command. See <URL:
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:02/19 06:58:54 (1 sec) Expires:02/19 12:58:53 @_@V