Articles delegate-en/3120-3160 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 3120 - 3160   digest:
Timeout issues
  01/31-05:01 . 3120  Gertjan Klein <> [26]
___ Yutaka, Done; log at It seems to be this line: (WIN) 51:47 [820] --- scan_HOSTS0 [HOSTS] Oddly enough, the same sequence appears way at the beginning of the lo
  01/31-05:17 . 3121 (Yutaka Sato) [37]
___ Hi, Hmm... I uploaded dbg4.exe to inspect for which host/addr the scan_HOSTS() function is stacking. I think you will be able to escape the problem by adding HOSTS=host/addr by hand. Might be. Cheer
  01/31-05:37 . 3122  Gertjan Klein <> [23]
___ Yutaka, The new log is at The culprit appears to be lines like the following: (WIN) 25:48 [1264] --- addhost1(localhost/:::) I also noticed that on the second
  01/31-06:18 . 3123 (Yutaka Sato) [39]
___ Hi, The delay seems to be caused just to convert IPv6 address from symbolic representation like ":::" to its binary representation. Maybe it is delayed in inet_aton() or inet_pton(), and maybe the p
  01/31-06:35 . 3124  Gertjan Klein <> [28]
___ Yutaka, Perhaps it could be the nameserver of the company I connect to? Excellent! That works! Thanks very much for your persistent support. If you're interested, you can find the log file of a succ
  02/02-05:01 . 3125 (Yutaka Sato) [54]
___ Hi Gertjan, Thank you for your cooperation to solve the problem. I'm specifying "NUMERICHOST" flag for IPv6-API function to stop DNS lookup in such address translation. If the delay is caused waitin
  02/02-22:36 . 3126  Gertjan Klein <> [26]
___ Yutaka, This version does have the delays, yes, so I can't use it directly. I have made available two log files: (with VPN off) and
  02/07-21:55 . 3127  <> [395]
___ Hi, I'm trying to set up an FTP/TLS proxy on SuSE Linux 9.3 and Delegate 8.11.5. I have compiled and installed delegate and everything appears to be running fine but I am having trouble authenticati
POP Proxy peculiarity
  02/10-21:40 . 3128  Andrew Shika <> [25]
___ Greetings, Delegetate is a fine piece of software. I have configured an HTTP,SMTP and SOCKS proxy fine but i came acroess this problem when I tried to configure the POP proxy: The users have usernam
  02/11-18:01 . 3129 (Yutaka Sato) [32]
___ If all of your clients are to be hosted with the server "pop://servername" then delegated -P110 SERVER=pop://servername without MOUNT, i.e. without rewriting username, will work. Otherwise, if you h
  02/11-18:27 . 3130 (Yutaka Sato) [33]
___ STLS=fsv is available after 9.0.1 and FSV="..." cannot be used with it. Only STLS option as STLS=fsv alone without any FSV=... will be enough in usual situation. If you need options like "-cert ...
POP Proxy peculiarity
  02/11-19:04 . 3131  "Andrew Shika" <> [57]
___ Thanks for your feedback Yutaka, I actually managed to do it like this: User*host@servername from the client site with the config Deletaged -P110 server=pop MOUNT=" * pop://servername/*". Are you ev
FTP Proxy 使用時の一時的なキャッシュ作成
  02/13-15:44 . 3132  Takahiro 1 Hashimoto <> [55]
___ お世話になります.日本IBMの橋本と申します. あるプロジェクトで、DeleGateの使用を検討中です. v8.11.5を使用する予定で現在機能検証を行っております. 用途としてはFTPプロキシーのみでの使用を考えております.
  02/13-19:10 . 3133 (Yutaka Sato) [34]
___ DeleGateは、FTP - FTP中継では、テンポラリファイルを作りません. FTPではテンポラリファイルを作る必要がありませんし(もしデータ内容に変換を 行った場合でも、HTTPにおけるHTTPヘッダのように調整すべき前置メ
  02/14-19:36 . 3134  <> [82]
___ Yutaka, I got everything working on Linux with the latest 9.0.5 version. I have one other question though. I've also been testing on Windows and I can't figure out how to pass the -cert and -key opt
  02/15-13:02 . 3135 (Yutaka Sato) [17]
___ Place PEM files at a directory included in "LIBPATH", typically at DGROOT/lib or the same directory with dgXXX.exe, and specify as this for example: dgXXX.exe DGROOT=c:/delegate STLS="fsv,sslway -ce
SSL disconnect problem
  02/17-17:38 . 3136 [569]
___ Hi, Sorry for the late reply, I can't see any "half_duplex" in the logs. We are using delegate to protect telnet clients with ssl, we are using/starting delegate as following dg9_0_4.exe -P8039 ADMI
  02/21-00:05 . 3137 (Yutaka Sato) [119]
___ Hi, I'm a little confused because your first mail was about a connection for "https" protocol. Anyway as you pointed it out, echoing shutdown against shutdown from the peer has not been supported in
Access Denied 502 - NNTP
  02/22-00:56 . 3138  Adam Engel <> [19]
___ Hi, I am actually having this problem yet again. Server had to be reformatted and configurations were not saved. I cannot locate the response to this issue. Do you have the response that was sent to
  02/22-16:19 . 3139 (Yutaka Sato) [24]
___ Hi, on 02/22/06(00:56:31) You can see the reason why it is rejected in your LOGFILE. With "-dh" option for DeleGate, you can see how the matching failed. You can retrieve the archive of feedbacks in
SSL disconnect problem
  02/22-18:02 . 3140 [1329]
___ Hi, Now I can see that delegate answers the encrypted alert, but it still stays up in windows. If I check with netstat, delegate session are up (TIME_WAIT) until windows time_wait value are reached.
  02/23-16:24 . 3141 (Yutaka Sato) [34]
___ Hi, It is very normal that a connection is held in TIME_WAIT status after disconnected. A problem can occur only when a new connection is tried to be established from the same source port to the sam
  02/24-20:51 . 3142 [203]
___ Hi, I think you found the problem, the telnet client (it is a selfmade software with openssl) are always using the same source port (1025). I shall tell them to change it to use random ports and the
delegate usage question
  03/01-09:19 . 3143  Eric Lenio <> [12]
___ Hi, I have read through the delegate manual but it was not quite clear to me, so I decided to write and ask directly. I want to set up my server such that only port 8080 is accessible from outside t
Strange behavior with HTTP 307
  03/02-05:57 . 3144  "Raphael Turbatte" <> [86]
___ Hi all I'm trying to set up a Delegate proxy on a subnet of my campus network, which uses BlueCoat's transparent proxy technology with HTTP authentication for outbound connections. When you try to c
  03/02-16:51 . 3145 (Yutaka Sato) [32]
___ on 03/02/06(05:55:44) DeleGate does nothing for 307 response message. Since DeleGate does not understand 307 code, it records the message header as "Error" in the LOGFILE. It relays the response mes
  03/08-22:48 . 3146  "Raphael Turbatte" <> [83]
___ Hello again I launched Delegate in detailed logging mode to check what was happening, then launched Internet Explorer and tried to go to . Here is an extract of what I found in the log
ftp proxy
  03/09-02:53 . 3147  "Richard Daggett" <> [111]
___ Howdy I am trying to configure delegate to route off the permit list instead of a dedicated server. I have search the groups and looked at the manual, but I do not see a how to do this. Looks like i
Strange behavior with HTTP 307
  03/09-16:42 . 3148 (Yutaka Sato) [84]
___ There is no transformation achieved, but DeleGate represents the permission of "CONNECT" method with protocol name "https" in historical reason. You should have seen that the connection is made to t
ftp proxy
  03/09-17:07 . 3149 (Yutaka Sato) [50]
___ PERMIT is a parameter just to control access permission. If what you need is switching the target server depending on the client, it can be like this: SERVER="ftp://server1:-:clientList1" SERVER="ft
An HTTP to FTP proxy
  03/09-21:18 . 3150  "Marcelo Spohn" <> [12]
___ Dear Yutaka, I am not being able to set up an HTTP to FTP proxy using Delegate. (BTW, I was not able to find the answer in Delegate's mailing list archives.) I would like to transfer files to/from a
ftp proxy
  03/10-00:52 . 3151  "Richard Daggett" <> [70]
___ Howdy Yataka Thanks for the info, but what I need is the same server routing to different clients depending on the source address (source) ---> ediftp( -->
  03/10-01:31 . 3152 (Yutaka Sato) [141]
___ Does not it mean this? -P198.187.200.11 SERVER="" SERVER="" <URL:>
  03/10-01:55 . 3153  "Richard Daggett" <> [138]
___ Howdy Yataka Its working, thanks for you help. Richard ---Original Message--- From: Yutaka Sato [] Sent: Thursday, March 09, 2006 9:32 AM To: Cc: fe
An HTTP to FTP proxy
  03/10-09:21 . 3154  Marcelo Spohn <> [49]
___ Hi Yutaka, The config file I'm currently using is shown below: -vv -P8080 SERVER=https FCL=sslway MOUNT="/* ftps://*" STLS=fsv,"sslway -vd" CACHE=no AUTH=proxy:auth PERMIT="*:*" LIBPA
Transfering files from FTP server over HTTPS
  03/11-00:50 . 3155  "Marcelo Spohn" <> [10]
___ Hi Yutaka, I need to setup a proxy that allows transfer of files from/to HTTPS clients to/from an FTP server. Does Delegate have support for such a proxy? Thanks, Marcelo
DeleGate/9.0.6(BETA) -- anonymizing NNTP articles, tracking SPAMmers, routing DNS
  03/11-14:40 . 3156 (Yutaka Sato) [101]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: DeleGate/9.0.6 -- anonymizing NNTP articles, tracking SPAMmers, routing DNS DeleGate/9.0.6 supported a form bas
cannot accept https proxy
  03/17-17:19 . 3157  "Kenneth Lo" <> [18]
___ Version 9.1.0-pre2 and the latest sslway dlls run on WinXP SP2. DeleGate started with delegated -P80 PROXY=upstream:port CACHE=no MAXIMA=standby:0 I found that DeleGate cannot accept https proxy. Th
DeleGate/9.1.0 (STABLE) -- new stable version
  03/21-09:44 . 3158 (Yutaka Sato) [40]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: DeleGate/9.1.0 (STABLE) -- new stable version This is a new stable version of DeleGate with new features and fi
Limit of Hostlist size
  03/23-21:48 . 3159 [109]
___ I'm meeting some problem. I suspect that sum of sizes Hostlists for one instance of Delegate limit to 1023 entries. It's true? Yours sincerely, Mironov Vadim.
newbie question: content rewriting HTTP/HTTPS proxy
  03/25-00:24 . 3160  Martin Vetter <> [36]
___ hi, I would like to rewrite the HTML delivered by a remote HTTP server, which is redirecting users to a remote HTTPS server after successful login. I was able to rewrite the HTML served via HTTP dep
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:03/29 22:07:18 (2 sec) Expires:03/30 04:07:16 @_@V