Articles delegate-en/2560-2640 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 2560 - 2640   digest:
FTP relay + compression
  03/06-23:08 . 2560 (Yutaka Sato) [53]
___ Simply applying compression for any data, including directory list (response for LIST/NLST) as well as usual data (response for RETR), is simply realized with: CMAP="gzip:FTOCL:ftp-data" If you have
strange performance problem
  03/07-12:26 . 2561  Gong Su <> [33]
___ Hi Yutaka, thank you very much! Using the udprelay I got around 460 transactions per second which is on par with other proxies! I used two separate delegate daemons for mapping two ports to (also th
  03/07-13:52 . 2562 (Yutaka Sato) [71]
___ Hi, I see, the previous patch did not care the port mapping -N where N==0. I'll fix it as the enclosed patch. Cheers, Yutaka D G Yutaka Sato <> ( - ) N
Telent proxy for clients on WinXP (Re: Telnet Proxy Problem)
  03/08-17:48 . 2563 (Yutaka Sato) [247]
___ I think that the problem depends on the initial default status of ECHO (by server or client) and SUPPRESS-GO-AHEAD (full-duplex mode) in each Telnet protocol interpreter. Telnet clients in Win95 ser
question regarding authentication
  03/11-05:54 . 2564  Robert Szasz <> [11]
___ I would like to set up an ssl proxy for pop3 (to local service) smtp (to local service) and nntp (to remote machine. I'd like to act as a simple ssl wrapper for pop3, but authenticate smtp to the po
Configuration + lack of time
  03/13-09:10 . 2565  "Virgil Iancu" <> [50]
___ Hi, What I need to set is to bypass the company proxy; so I want to set my home computer to do the job: NNTP access, http browsing and POP access. For all of them I would like to talk SSL between my
Delegate under RedHat 7.0
  03/13-09:35 . 2566 [9]
___ Hello, Were you able to resolve the problem with running Delegate under RH 7.0? I'm having the same problem. The system says "bash: delegated:command not found" Your help is urgently neede !! Victor
FTP to HTTP proxy
  03/13-09:58 . 2567  Guillaume Proux <> [25]
___ I would like to application proxy from FTP to HTTP Is it possible? The following does not seem to work dg -v -P21 SERVER=ftp MOUNT="/myserver/* http://myserver/~gproux/test/*" ADMIN="anemailaddress"
A very weird delegated problem
  03/13-10:01 . 2568  lupin2000 <> [29]
___ Hi: I use a ftp client(smartftp),and ftp server(proftpd). The SSL option is enabled on both server/client sides. I run delegated on a proxy machine,with the following command: ./delegated -v -P7010
Problem with Delegate/7.9.13
  03/13-17:34 . 2569  "vanny" <> [92]
___ Hello, I've installed and used delegate/7.9.13 for nearly a year.So far it's worked perfectly.But in a few days ago it started to malfunction for some websites.I mean it can't get the requested page
A very weird delegated problem
  03/13-19:29 . 2570 (Yutaka Sato) [51]
___ Hi, I could reproduce the problem just with a client side SSLway like this: delegated -P9999 SERVER=ftp://server \ CMAP="sslway -St:FCL:ftp" \ CMAP="sslway:FCL:ftp-data" It is because SSLway is not
question regarding authentication
  03/13-20:07 . 2571 (Yutaka Sato) [33]
___ delegated -P9110 SERVER=pop MOUNT="* pop://popserver/*" FCL=sslway delegated -P9021 SERVER=ftp MOUNT="* pop://popserver/*" delegated -P9025 SERVER=smtp://smtpserver AUTHORIZER=localhost/9021 delegat
Masquerede as IP address on box?
  03/16-02:18 . 2572  "BT" <> [70]
___ Hi, all! I was able to set up Delegate and run it successfully. However, I do have a question. I am using a server several hundred miles away as my middle man to my home computer. The server (with t
DeleGate child processes cause CPU soaring
  03/16-20:45 . 2573  "Sun Jerry" <> [78]
___ Hello, We are running DeleGate on a RS/6000 box(AIX 5.1) as a SMTP and POP3 gateway to relay packages between intranet and the Internet servers. It worked very well until one month ago and started f
Logs problem Release 8.9.1
  03/17-19:05 . 2574  Cappellari Antonio <> [50]
___ Hi all I'm using the rel 8.9.1 of delegate sw in a linux box. The delegated sw has been compiled in a Redhat 8.0 distribution (kernel 2.4.18-14). The proble is: when I invoke the delegated applicati
PERMIT and Name-Resolution
  03/18-02:57 . 2575  Manuel Martin <> [29]
___ Hello Yutaka Sato, I tunnel some not-so-common protocols through a delegate 8.9.1 (on Windows) via SOCKS, and allow access with PERMIT-rules. Example which should allow pcAnywhere to a certain host:
Using stunnel instead of sslway
  03/20-08:01 . 2576  Robert Szasz <> [4]
___ Has anyone had problems using the stunnel wrapper with delegate. I have not been able to compile the old SSLeay, and am having many problems with making the openSSL distro spit out a sslway binary.
How to specify multi-mail servers on POP-Proxy
  03/23-11:26 . 2577  "vanny" <> [86]
___ Dear Sirs and Madams; I've installed POP-Proxy.By using Delegate(POP), I don't want to ask each users to change their existing Account's setting, for instance in the Account's box from "vanny" to "v
Socks log file reader
  03/24-01:34 . 2578  "Oliver Marshall" <> [49]
___ Hi, We are using Delegate 8.9.2 for linux to act as a socks proxy server. I would like to know what format the socks log is in? I would like to generate reports from the log files. Thanks Olly
problem with many delegate process during stress test
  03/25-02:52 . 2579  Jehan-Guillaume de Rorthais <> [80]
___ Hello, I made some stress tests on delegate8.5.0 with the "siege" benchmarking utility ( and meet a strange behavior of delegate. So I retry with the last stabl
A question with Delegate
  03/26-19:31 . 2580  "vanny" <> [65]
___ Hi, I still have a problem that I cannot resolve by myself.The problem is that my Delegate/7.9.13(http proxy) couldn't establish connection with a web server( When
small patch : delegate as origin http server, css and Mozilla...
  03/27-00:07 . 2581  Jehan-Guillaume de Rorthais <> [33]
___ Hi, Here a small patch from the 8.9.2 delegate tree. It just allow to use css stylesheet with mozilla clients (mozilla, firerbird, firefox)... Indeed, I use analog/rmagic for statiscs with delegate
Logs problem Release 8.9.1
  03/27-18:07 . 2582 (Yutaka Sato) [17]
___ "-vv" option means running DeleGate in foreground like "-f". Cheers, Yutaka D G Yutaka Sato <> ( - ) National Institute of Advanced Industrial Science
Using stunnel instead of sslway
  03/28-00:49 . 2583 (Yutaka Sato) [15]
___ Which version of OpenSSL are you using on which OS ? I did not encounterd problem to make recent versions of OpenSSL including OpenSSL-0.9.7d on Linux, MacOSX, Windows and so on. Cheers, Yutaka D G
How to specify multi-mail servers on POP-Proxy
  03/28-03:11 . 2584 (Yutaka Sato) [23]
___ You can specify a POP server for each user like this: SERVER=pop MOUNT="vanny pop://" MOUNT="berry pop://" Cheers, Yutaka D G Yutaka Sato <> http:/
Socks log file reader
  03/28-03:17 . 2585 (Yutaka Sato) [16]
___ It is just an ad hoc format which is intended to be human readable... Do you know some standard log format of SOCKS to be followed ? Cheers, Yutaka D G Yutaka Sato <> http://deleg
How to specify multi-mail servers on POP-Proxy
  03/29-10:09 . 2586  "vanny" <> [44]
___ Dear Mr. y.Sato Thank you very much for your response. I can now setup Delegate(pop-proxy) to satisfy users in my work place . Cordially yours, vanny --- Original Message --- From: "Yutaka Sato" <fe
What do these UDP Ports for?
  04/05-20:19 . 2587  "Wu Jiafu" <> [22]
___ Hi, I am running a current version of delegate in a linux box as a FTP proxy, I found that delegated listening on the tcp 21 port, but also running on 2 UDP ports something like this(netstat -apn) t
Sigsegv when trying to run delegate 8.9.2 on yellowdog 3
  04/06-04:19 . 2588  "Rich Stanton" <> [97]
___ Hi, I've compiled delegate 8.9.2 on a yellowdog linux 3 system. However when I try & run it it doesn't work. Here's what I'm running: delegated AUTHORIZER=-socks.users -P1081 SERVER=socks PERMIT=*:*
  04/06-07:04 . 2589 (Yutaka Sato) [39]
___ Possibly your setting of resource limit on stack size is too small to execute DeleGate. It is expected larger than one megabyte at least. What is the result of "limit" command ? % csh -c limit stack
BUG? UDP Ports
  04/06-14:00 . 2590  "Wu Jiafu" <> [39]
___ Hi, I checked this issue again and again. I found that if I start delegated with RESOLV=file,dns or whatever (even if it's the same as the default value RESOLV=cache,file,dns,sys), these 2 UPD ports
  04/06-14:11 . 2591  "Wu Jiafu" <> [49]
___ and, this issue appears in my windows 2000 box(delegated 8.9.2 binary from too --- Original Message --- From: "Wu Jiafu" <> To: <feedback@deleg
Sigsegv when trying to run delegate 8.9.2 on yellowdog 3
  04/06-17:39 . 2592  "Rich Stanton" <> [64]
___ Doing this my stacksize was listed as 8192kbytes. I executed the first 2 commands, and delegated did it's usual startup: GNU gdb Yellow Dog Linux (5.2.1-4b) Copyright 2002 Free Software Foundation,
  04/06-20:41 . 2593 (Yutaka Sato) [66]
___ Then the problem seems not to be caused by stack limitation. This command means running DeleGate as follows: Sorry, to let DeleGate run in foreground and be monitored by gdb, you shoulld have done i
  04/06-21:26 . 2594  "Rich Stanton" <> [77]
___ Right then - thanks for your patience, here's the log from the gdb session (sorry if you didn't need the whole thing!). (gdb) run -v -P9999 SERVER=socks Starting program: /usr/sbin/delegated -v -P99
small patch : delegate as origin http server, css and Mozilla...
  04/15-01:19 . 2595  Jehan-Guillaume de Rorthais <> [62]
___ humf...Mea culpa Replying to myself... Currently, I search to rewrite html page send by servers with the 503 http status code...Reading the delegate manual, I just discover the FILETYPE option in th
Tunnel over HTTP PROXY???
  04/20-09:31 . 2596  Jose Maria Sarachaga <> [48]
___ Hi Yutaka! Hi list! I've been looking for this case in the list archive but no responses are made, are those solved? I need to make direct connections like TELNET or SSH(hopefully SSH, but for now i
Can I use one port for multiple protocols
  04/20-09:58 . 2597  "Dan Higgins" <> [15]
___ Greetings, If I have one port open, can I use Delegate to accept connections on that port, then look at the incoming stream, and forward on to different ports based on the stream data? More specific
  04/20-13:02 . 2598  Tim Smith <> [5]
___ hello i like delegates features and it seems to be the general prupose proxy i am looking for. however i have been googling and in the past delegate has gotten a bad rap for buffer over flows. what
Can I use one port for multiple protocols
  04/21-03:15 . 2599  "Dan Higgins" <> [34]
___ Here is more info on the config I'm trying, but I can't see why it doesn't work. For this example, only port 8888 is open to the outside. I've got 2 config files, the first: ---BEGIN--- -P8888 -vv S
DeleGate vs. WinGate -- Installation/configuration
  04/21-14:16 . 2600  Christopher Markis <> [31]
___ I used to use Wingate to dial in to my home from remote sites using a laptop. This was set up to simply allow me access to COX high-speed internet connectivity for me no matter where I was. I recent
cross compilation of delegate
  04/23-16:43 . 2601  "simon abraham" <> [11]
___ hi i have used delegate proxy server on normal linux machine.and it works fine. i would like to know how to cross compile it for arm linux. regards -sim ___ Contact brides & grooms FREE! http://www.
FTP's problem
  04/26-16:01 . 2602  "vanny" <> [166]
___ Hi,everyone. Recently I've setup ftp proxy by using Delegate-7.9.13.Well,it works fine from commandline;but from broswer(IE6) it produced no result(couldn't get data).Here is my setting: DELEGATE=/s
Can I use one port for multiple protocols
  04/27-07:36 . 2603  "Dan Higgins" <> [13]
___ [...] Hello? Is anybody out there? I have spent many hours reading the man page and trying different tweaks to this config. If what I'm trying to do is not possible, please say so. If it is possible
Problem with PAM authentication
  04/28-01:28 . 2604  Jehan-Guillaume de Rorthais <> [350]
___ Hi, I'm trying the PAM Authentication feature. My configuration of delegate is the following (on port 7978 for test) : ___CONF___ -P7978 env[16] LIBPATH=.;/root/delegateTest;/delegate/lib;/usr/local
RELEASE DeleGate/8.9.3 -- added SMTPCONF=callback, fixed SSLway, FTP+SSL, Telnet, Tcprelay, etc.
  05/06-12:12 . 2605 (Yutaka Sato) [54]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate8.9.3.tar.{gz,bz2} DATE: May 5 17:54 JST 2004 TAR-SIZE
nntp auth
  05/10-00:59 . 2606  "George Zlatanov" <> [25]
___ Hello! I'm trying to access nntp via http with DeleGate. My syntax is: ../delegated -v -P8050 MOUNT="/netnews/* nntp://news.server.tlda/*" I do have username and password for that news se
  05/11-16:52 . 2607 (Yutaka Sato) [127]
___ There could be something unexpected conversation for the negotiation with the NNTP server. Could you show me the dialog between the server and DeleGate using the following option? FSV=-tee-n I saw a
Problem with PAM authentication
  05/11-18:23 . 2608 (Yutaka Sato) [43]
___ Hi, On 04/28/04(01:28) you Jehan-Guillaume de Rorthais <> wrote in <_A2604@delegate-en.ML_> If you see a line like follows in your LOGDIR/stderr.log, ## pam_
FTP's problem
  05/11-21:01 . 2609 (Yutaka Sato) [38]
___ FTP-DeleGate accepts "//host/path" as an argument for CWD, LIST, RETR, or so. Thus for a client in HTTP protocol, a URL like "ftp://ftp-delegate///host/path" should work to get "ftp://host/path". Bu
Can I use one port for multiple protocols
  05/11-23:44 . 2610 (Yutaka Sato) [85]
___ It could be reasonable that, reading the Manual.htm, you thought that FORWARD can be used for such routing based on protocol. But actually the protocol on the client-side is fixed with SERVER parame
  05/12-00:41 . 2611 (Yutaka Sato) [62]
___ I think it is so difficult to say some piece of software is secure. Almost all of C programs or libraries have been suffered from buffer overflows despite they tried or claimed to be secure. On Dele
small patch : delegate as origin http server, css and Mozilla...
  05/12-00:57 . 2612 (Yutaka Sato) [22]
___ FILETYPE parameter is intended to add non-standard types, but "text/css" is standard enough to be added into "filetype.c". There are many media-types registered at IANA which should be listed in "fi
media-types to be added
  05/12-01:16 . 2613 (Yutaka Sato) [53]
___ What I should have referred is the original list on IANA, <URL:> But even in the latest list, there seems to be so many types not yet registered despite t
small patch : delegate as origin http server, css and Mozilla...
  05/12-02:04 . 2614  Jehan-Guillaume de Rorthais <> [52]
___ Hello, In my case, the problem was that Mozilla's browsers don't care about the css files if they don't have the text/css Mime-extension... Anyway, thanks for your help on my PAM problem, I currentl
nntp auth
  05/12-05:53 . 2615  George Zlatanov <> [619]
___ --- Original Message --- From: "Yutaka Sato" <feedback@delegate..> Newsgroups: mail-lists.delegate-en Cc: <> Sent: Tuesday, May 11, 2004 0:52 Subject: [DeleGate-En] Re: nntp aut
  05/12-08:14 . 2616 (Yutaka Sato) [49]
___ So the problem is why it does not work when the username is given by HTTP client. This log shows that username is received from HTTP client but is not forwarded to NNTP server. Since the authenticat
FTP's problem
  05/12-11:11 . 2617  "vanny" <> [25]
___ Hi,Yutaka Sato thank you for your providing a solution.Using IE, now i can access other ftp servers. Cheers, vanny
ssl-connection fails with delegate 8.9.3
  05/12-17:52 . 2618  bernhard rauh <> [401]
___ Hello, I've installed a delegate 7.9.4 to connect with http to a https-page mounted with delegate. This all works fine such as I used version 8.9.3. I can't connect to the https-page. What goes wron
  05/13-06:32 . 2619 (Yutaka Sato) [30]
___ Which version of SSLway are you using ? SSLway which work with 7.9.4 will not work with 7.9.5 or laters. Cheers, Yutaka D G Yutaka Sato <> ( - ) Nation
  05/14-01:40 . 2620  bernhard rauh <> [14]
___ Hello Yutaka, I don't know, which version of sslway I used, there is only a date of the file. I've installed the latest version of sslway which was downloadable from the delegate-ftp-server and it w
cross compilation of delegate
  05/14-06:31 . 2621 (Yutaka Sato) [52]
___ What machine is your target ? I've made DeleGate/8.9.3 and SSLway on Zaurus and released it at <URL:> (This was made on Zaurus itself) Now I tried cros
ssl-connection fails with delegate 8.9.3
  05/14-06:35 . 2622 (Yutaka Sato) [21]
___ Not the version but the date of modification is shown by -v option. SSLway 2004-05-05 <> Cheers, Yutaka D G Yutaka Sato <> ( - ) Nati
Delegate Config
  05/18-07:00 . 2623  "ashika" <> [307]
___ Greetings, I want to utilize delegate on a muti-homed linux server to do the following: a. http proxying for interanal clients (example works like charm :-) b. dns resolution for internal clients c.
RELEASE DeleGate/8.9.3 -- added service shutdown on abort in child process, fixed FTP, gzip/HTTP
  05/18-09:10 . 2624 (Yutaka Sato) [37]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate8.9.4.tar.{gz,bz2} DATE: May 17 10:44 JST 2004 TAR-SIZ
OWA not working via IE
  05/20-00:10 . 2625  Alex Ongena <> [258]
___ Hi, I use Delegated 8.9.4 on our Firewall to 'proxy' http to an internal IIS with Outlook Web Access. This works fine for a Mozilla browser (client), but with Internet Explorer 6.x I do not get the
I need you help, Client HTTP->HTTPS Problem
  05/21-01:42 . 2626  Alfredo Pulido <> [278]
___ Hello, I'm Alfredo I'm System Admin for ISP in Spain. I want use delegate for this scenary: I have installed the delegate8.9.4 and put this configuration: ../delegated -P80 SERVER=http FSV=sslway -c
get the job you deserve with a university degree - no classes needed!
  05/21-07:59 . 2627  "Bettye Singleton" <> [108]
DNS & FTP Proxy problems
  05/28-01:09 . 2628 [30]
___ Hi, I am using the latest copy of delegate on Linux redhat and have the following problems: I have configured server X to be my internal DNS server. On server X i have delegate running with the foll
sockmux win32
  06/03-05:51 . 2629  "martin papadopoulos" <> [327]
___ hello yutaka, the current win32 build delegate8.9.4 produces the following error when initiated as stated below: delegate server=sockmux://destination:port PORT=someport 06/02 22:43:57.90 [3792] 0+0
FTP proxying from internet to intranet
  06/04-00:35 . 2630  Dmitry Donskih <> [79]
___ Hello, I am using DeleGate 8.7.8 on Linux gateway and have problems accessing an intranet FTP server from internet thru FTP proxy. I can connect to FTP server, CWD command works fine; but when I try
Problem with PAM authentication
  06/04-02:08 . 2631  Jehan-Guillaume de Rorthais <> [655]
___ Hi YS, Thanks for your last answer. First, here the part of my script which launch delegate for the options I use : ___SCRIPT___ PARAM=$1 PATH=$PATH:/usr/local/+delegate8.9.2/subin if [ -z "$2" ]; t
fake activity of an idle connection
  06/04-04:21 . 2632  Travice Dane <> [33]
___ Hello, We use delegate to proxy ssl encrypted telnet connections from our external clients to a telnet server inside. Everything works just fine. Unfortunately, those connections can remain inactive
Reg Delegate ..
  06/08-00:16 . 2633  "Ganesh Kumar.K, BSC, Ambattur, Chennai." <> [10]
___ Hi All, Kindly let me know if there is any administration tool for delegate. Also do let me know the best practices for deploying Delegate in the network for proxying various protocols. Thanks Ganes
RELEASE DeleGate/8.9.5 -- fix for Win32 (8.9.4),virtual host (8.9.3),added JIS to ASCII conv,etc.
  06/09-08:16 . 2634 (Yutaka Sato) [35]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate8.9.5.tar.{gz,bz2} DATE: Jun 9 07:12 JST 2004 TAR-SIZE
basic question http-Client ---> DeleGate ---> https-Webserver
  06/09-22:41 . 2635  <> [21]
___ Hello, I would like to use DeleGate for the following (no client-authentication): Unfortunately, I don't have too much knowledge about proxys. After a lot oft tries it worked with the following conf
sockmux win32
  06/11-04:35 . 2636 (Yutaka Sato) [38]
___ Hi, Unfortunately I can't reproduce the problem on my Win32 machine. It might be caused on the way of name resolution for "destination" host. Could you test what will happen when you specify another
  06/11-04:57 . 2637  "martin papadopoulos" <> [432]
___ Hello yutaka, here ist the mail send after the STOP error: ---Ursprngliche Nachricht--- Gesendet: Donnerstag, 10. Juni 2004 22:43 Betreff: DeleGate-Report: SIG??? PLEASE FORWARD THIS MESSAGE TO <bug
OWA not working via IE
  06/11-07:53 . 2638 (Yutaka Sato) [48]
___ Hi, The "SEARCH" method takes XML data as message body in both request and response messages, and XML data may contains URL. <URL:
I need you help, Client HTTP->HTTPS Problem
  06/11-08:09 . 2639 (Yutaka Sato) [26]
___ You need to specify arguments for sslway to be passed to sslway, using quotation like this: FSV="sslway -cert client.pem -key clientkey.pem -pass xxxxx" Cheers, Yutaka D G Yutaka Sato <y.sato@delega
FTP proxying from internet to intranet
  06/11-09:53 . 2640 (Yutaka Sato) [25]
___ Did you tested the latest version of DeleGate? Is not here any message on the log? More detailed log with "-vd" option will be helpful to see what is going. Cheers, Yutaka D G Yutaka Sato <y.sato@de
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:03/30 00:44:07 (3 sec) Expires:03/30 06:44:04 @_@V