Articles delegate-en/1400-1500 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 1400 - 1500   digest:
  11/12-18:33 . 1400  Emmanuel Cerisier <> [99]
___ Hi Yutaka, I couldn't get trough posting to your ML, so I send directly this query to, hoping you'll approve it and post it to the newsgroup/ML. Thanks, Regards Emmanuel Cerisi
delegate and Netscape messenging server
  11/12-20:39 . 1401  Emmanuel Cerisier <> [43]
___ On 11/12/01(18:33) you Emmanuel Cerisier <> wrote this query to to the newsgroup/ML. timed out with Could you tell me where you got the obsolete address? The server "smtpgate.e
  11/12-21:29 . 1402 (Yutaka Sato) [41]
___ Could you tell me where you got the obsolete address? The server "" retired a month ago. The address "" is the right address of the entrance of the newsgroup (
  11/12-21:33 . 1403  "Christine Hall" <> [97]
___ Hello, I visited and I noticed that you are not listed on some search engines. I am sure you can increase the number of people who visit . Do you know TrafficMagnet
Howto? SSL FTP Tunneling
  11/14-04:34 . 1404  "Bryan Dees" <> [40]
___ Hello Yutaka, I'm using your latest stable release of Delegated on Red Hat 7.1 as a proxy server front end to my network. I managed to figure out how to proxy FTP and HTTP without any difficulty. Bu
  11/14-06:22 . 1405 (Yutaka Sato) [27]
___ Hi, A simple example to relay HTTPS/SSL client to HTTPS/SSL server is like this: delegated -P8443 SERVER= FSV=sslway FCL=sslway You will be able to access this DeleGate from
SOCKS 4 Server reply messages
  11/14-07:15 . 1406  Claudio Topolcic <> [26]
___ Hello! We downloaded DeleGate version 7.5.4 and installed it as a SOCKS Server on a Mandrake Linux PC. Your directions for doing this were very simple and we had no problems there. However, we did h
Howto? SSL FTP Tunneling
  11/14-07:27 . 1407  "Bryan Dees" <> [71]
___ Good Morning! Thank you for the example. However, when using the FTP protocol in place of the https protocol I get the following error: 11/13 15:22:23.10 [17830] 1+0: ConnectToServer: DFLT=ftp://goa
  11/15-00:43 . 1408 (Yutaka Sato) [38]
___ Hi, So can I understand my HTTPS example worked without problem in your environment? Does this server "" talk "FTPS" which start SSL without negotiation? If so, some
  11/15-01:47 . 1409  "Bryan Dees" <> [114]
___ Hello, Yes, thank you very much. Your HTTPS example allowed me to relay without any problems to my HTTPS server. My FTP server '' uses AUTH TLS negotiation. I added your su
SOCKS 4 Server reply messages
  11/15-01:54 . 1410 (Yutaka Sato) [77]
___ Hi, Thank you for your pointing out the problem. Could you tell me the names of the client products? Maybe I did not read this part of document when I rapidly implemented SocksV4 in DeleGate about 6
Howto? SSL FTP Tunneling
  11/15-02:18 . 1411 (Yutaka Sato) [50]
___ Hi, I see. Is your command literally as above? I cannot understand your intention to specify FSV only to ftp-data connection while specifying FCL only to ftp control connection. Since SSL session fo
SOCKS 4 Server reply messages
  11/15-04:26 . 1412  Claudio Topolcic <> [30]
___ Yutaka, Thank you for your reply. I have just done some testing. Netscape 6.2 seems to refuse the reply messages. It FINs the connection immediately after receiving the reply message. NS 6.2 can sup
Howto? SSL FTP Tunneling
  11/15-04:41 . 1413  "Bryan Dees" <> [525]
___ Hello again, I think i'm close but i'm still having trouble with ftp-data I think. I get established, get one line of data then a subsequent 521 error from FTP. On the server i'm using the following
  11/15-05:08 . 1414 (Yutaka Sato) [22]
  11/15-05:19 . 1415 (Yutaka Sato) [23]
___ Bryan, (Sorry, I sent the previous message in broken format) Sorry but I don't know with what application I can read the content type: Could you show me the dialog of the FTP client and the relevant
  11/15-06:08 . 1416  "Bryan Dees" <> [250]
___ Sure, here's the Delegate log: 11/14 12:30:08.83 [23970] 0+0: --INITIALIZATION DONE-- 11/14 12:30:23.86 [23970] 0+0: AcceptByMain: TIMEOUT(children=0, timeout=15) 11/14 12:30:45.08 [23973] 1+0: -- F
  11/15-08:57 . 1417  "Bryan Dees" <> [70]
___ I finaly got it all to work! delegated \ -P10021 \ SERVER= \ CMAP="sslway -st:FCL:ftp:*:*" CMAP=sslway:FCL:ftp-data:*:* I took out the CMAP for FSV and added the end
  11/16-02:32 . 1418 (Yutaka Sato) [43]
___ Bryan, Thank you for your sending detailed log. Inspecting it I found that there are tow problems or bugs in FTP-DeleGate. - DeleGate does not start SSL session (by inserting FSV filter) for ftp-dat
  11/16-03:40 . 1419  "Bryan Dees" <> [84]
___ Our FTP server accepts both SSL and non-ssl FTP off the same port. So, what you are saying makes complete sense. In order for me to relay both SFTP and FTP I had to use two separate commands/ports,
  11/16-06:59 . 1420 (Yutaka Sato) [122]
___ Hi, Maybe the problem which occurs when this DeleGate is used by non-SSL client is that ftp-data connection is always in SSL unconditionally. The enclosed patch to sslway.c will introduce "-ad" opti
  11/16-07:31 . 1421  "Bryan Dees" <> [151]
___ Yutaka, Are you adding the following patch to your FTP site? If not, how shall I add the patch to 7.6.1 filters/sslway.c file? Thank You, Bryan ---Original Message--- From: [ma
  11/16-09:45 . 1422 (Yutaka Sato) [15]
___ I uploaded a little refined version at the following location: Cheers, Yutaka @ @ Yutaka Sato <> (
LDAP authentication for ftp proxy
  11/17-02:11 . 1423 [52]
___ Hello, I'm looking for a way to do LDAP authentication with your ftp proxy. I used these parameters, but it don't seem to work : SERVER=ftp RESOLV="" RELIABLE=* REMITTABLE="ftp,ldap" ADMIN=pr4cqbdyi
Howto? SSL FTP Tunneling
  11/17-03:48 . 1424  "Bryan Dees" <> [38]
___ I wish I got this kind of support from the vendors I actually pay money for :) Thank you Yutaka, your fix worked like a charm. I'm in business thanks to you.. Sincerely Yours, Bryan Dees Airborne Ex
LDAP authentication for ftp proxy
  11/19-18:59 . 1425 [161]
___ Ou!!! I don't know that delegate support ldap autentification. It is true? And how it work? WBW, Vadim Mironov
  11/19-23:20 . 1426 (Yutaka Sato) [16]
___ Me, neither. Not true unfortunately, but I feel it' interesting to figure out how it should work. Cheers, Yutaka @ @ Yutaka Sato <> ( - ) National
  11/20-00:19 . 1427 [236]
___ Example (at my organization): 1. We have two different autentification domains - Novell and Windows. One thing where it intersect - LDAP mechanism. 2. We don't need ftp service on Novell and need au
Shutout files as dynamic ACL
  11/20-02:25 . 1428 [192]
___ May I use shutout mechanism for temporary disabling some clients? I can't -hup Delegate every minute and need some method to eliminate "bad guys". How looks like shutout files? How I can use this? W
  11/20-06:58 . 1429 (Yutaka Sato) [24]
___ Yes. To shutout a client host with IP-address xx.xx.xx.xx, create a file named like follows: DGROOT/adm/shutout/xx.xx.xx.xx The contents of the file can be anything or empty. And specify the timeout
DeleGate/7.6.2 (ALPHA) -- fixes for MOUNT, SMTP, SOCKS, etc. and extensions for HTTP, SSLway, etc.
  11/20-10:01 . 1430 (Yutaka Sato) [34]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.6.2.tar.{gz,bz2} DATE: Nov 20 09:43 JST 2001 T
Having problems connecting too your ftp server ....
  11/20-23:39 . 1431  Santiago =?iso-8859-1?Q?=C1rraga?= <> [27]
___ [arraga@mauser arraga]$ ncftp -u anonymous NcFTP 3.0.2 (October 19, 2000) by Mike Gleason (ncftp@ncftp..). Connecting to delegate.a02 PROXY-FTP server (DeleGate/7.
SOCKS 4 Server reply messages
  11/21-03:08 . 1432 (Yutaka Sato) [61]
___ Hi, Me neither. I myself seldom use Socks for HTTP protocol. Thus I did not know, and am surprised to know that even recent WWW browsers does not support SocksV5. Maybe authentication mechanism intr
  11/22-05:53 . 1433  wasp_ <> [33]
___ Dear users! Wee organ my two user:) Uses delegate 7.6.1 but only in this the in shape I know start:( system "/etc/delegate/src/delegated -P192.168.0.4:8080 ADMIN=danka SERVER=http"; system "/etc/del
DeleGate/7.7.0 -- extensions for Socks (Socks4A and FORWARD=socks)
  11/22-17:17 . 1434 (Yutaka Sato) [23]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.7.0.tar.{gz,bz2} DATE: Nov 22 16:59 JST 2001 TAR-SIZ
  11/25-13:26 . 1435  Christine Hall <> [82]
Building Delegate 7.7.0 in OS/2
  11/27-01:04 . 1436 [25]
___ Happy Thanksgiving, all (especially if it's not a holiday where you are) I took a break over the holiday weekend to build the new Delegate 7.7.0 on OS/2. (Isn't this what everyone does over the holi
Ftp server, "220 line command" and buildin -sed filter
  11/27-06:46 . 1437  Damien <> [56]
___ Hello ! I try to build a ftp server like this : delegate -P21 SERVER="ftp://test:test@test.." But when client connect to my server, they see comment about the connection with the server lik
  11/27-08:03 . 1438 (Yutaka Sato) [44]
___ Customizing response messages should be done by "MOUNT" for definitions of built-in messages in general, but it is not supported yet in this case. Generic option to hide real name of target server s
Re[2]: [DeleGate-En] Ftp server, "220 line command" and buildin -sed filter
  11/27-08:22 . 1439  Damien <> [60]
___ Thanks for this fast answer :) Tuesday, November 27, 2001, 12:03:27 AM, you wrote : PGP FingerPrint 4252 4FE6 F29B E385 291D 99F3
Building Delegate 7.7.0 in OS/2
  11/27-08:40 . 1440 (Yutaka Sato) [28]
___ Hi, Happy Thanksgiving, although it's not holiday in Japan :p Thank you. I will fix it in the next release (7.7.1) Cheers, Yutaka @ @ Yutaka Sato <>
DeleGate/7.7.1 -- fix for OS/2
  11/28-18:07 . 1441 (Yutaka Sato) [21]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.7.1.tar.{gz,bz2} DATE: Nov 28 17:42 JST 2001 TAR-SIZ
where do i miss the point?
  12/03-07:12 . 1442  "Jens-E. Hansen" <> [34]
___ Hi! I try to map /dir1/* to ftp://host/dir0/dir1/* Logging in and cwd to /dir1 brings me to ftp://host/dir0/dir1 Calling ls the first time I get the listing from ftp://host/dir0/dir . Calling ls the
  12/03-18:23 . 1443 (Yutaka Sato) [61]
___ Hi, You should be right, except for the typo in the following line for "-P21" :p This MOUNT does not work as you expected if you logged in as an non-anonymous user because ftp://host/dir0/dir1/* mea
SSL Proxy
  12/06-23:40 . 1444  Steve Able <> [29]
___ Is there an option that will pass the requesting IP address through Delegate so that the http server can see the original requesting IP address?
  12/07-04:09 . 1445  Moss Hays <> [16]
___ I would like to clarify this question. This is NOT limited to the case where delegate may be acting as an "SSL Proxy" For example: Using delegated -P443 FCL=sslway SERVER=https MOUNT="/* http://some
dropping connections with traffic when using silence parameter.
  12/18-13:23 . 1447  "Mike State" <> [1582]
___ I just wanna start by saying thanks for the amazing software. It's awesome!!! I've tried the time=silence:N feature and my connection keeps dropping even though I am passing traffic back and forth (
  12/19-14:42 . 1448 (Yutaka Sato) [34]
___ Could you show me a set of the output of tcpdump and the corresponding stuff of logfile of DeleGate for a connection? Each TIMEOUT has its own default value which is non-zero usually. <URL:http://ww
Hotmail with Outlook Express Client
  12/21-23:58 . 1449  "" <> [19]
___ Hi, I am using the delegate proxy with W2K and am extremely satisfied so far. Here is how I managed to get hotmail working using the Outlook Express email client: HTTPCONF=methods:+,PROPFIND,MOVE,BD
  12/22-19:14 . 1450 (Yutaka Sato) [27]
___ Sorry but I don't have any knowledge nor experience with MSN Messenger. You seems to make DeleGate as a HTTP proxy work as a gateway for MSN Messenger, but I feel using DeleGate as a Socks proxy mig
  12/22-19:46 . 1451 (Yutaka Sato) [41]
___ Hi, Now I've become a little experienced with MSN Messenger :) I confirmed that using Socks-DeleGate like above works to relay MSN M. I needed to change the proxy setting for MSIE too, to do somethi
how to subscribe ?
  12/23-08:11 . 1452  "Hashim" <> [25]
  12/23-18:34 . 1453 (Yutaka Sato) [9]
___ Changing the route of mail forwarding for DeleGate-En ( by SMTPGATE following the retirement of "" Cheers, Yutaka @ @ Yutaka Sato <> http://www
  12/23-19:09 . 1454 (Yutaka Sato) [10]
___ Cheers, Yutaka @ @ Yutaka Sato <> ( - ) National Institute of Advanced Industrial Science and Technology (AIST) _< >_ 1-1-4 Umezono, Tsukuba, Ibara
  12/23-19:11 . 1455 (Yutaka Sato) [11]
___ Cheers, Yutaka @ @ Yutaka Sato <> ( - ) National Institute of Advanced Industrial Science and Technology (AIST) _< >_ 1-1-4 Umezono, Tsukuba, Ibara
  12/23-19:23 . 1456 (Yutaka Sato) [14]
___ hope finished. Cheers, Yutaka @ @ Yutaka Sato <> ( - ) National Institute of Advanced Industrial Science and Technology (AIST) _< >_ 1-1-4 Umezono,
delegate exploits
  12/24-10:59 . 1457  Lim Chee Wooi <> [8]
___ Hi, I found one exploit on delegate server, please try or Lim
  12/24-14:19 . 1458 (Yutaka Sato) [20]
___ Could you tell me the version and the configuration parameters of the DeleGate you found? By default, HTTP-DeleGate prohibits access to "file:*", usage from clients on non-local networks to the Dele
  12/24-14:46 . 1459  Lim Chee Wooi <> [28]
___ I fixed it already. Thanks
  12/24-21:34 . 1460  "Srikumar K M" <> [11]
___ Dear Yutaka We are using delegate Proxy with Socks protocol on Redhat Linux 7.1 server . Through SOCKS CuteFTP and ICQ Messanger works,but i am not able to browse internet and download email through
  12/27-14:19 . 1461 [190]
___ I wrote early about this behavior of Delegate, but don't get answer. When Delegated write new log file( cyclic behavior like LOGFILE = '${LOGDIR}/${PORT}[date+.%d]') it rename old file with .old ext
  12/27-16:10 . 1462 [163]
___ Good time of day. One proposal - can you implement some traffic shaping mechanism for Delegated? It will be very useful for large installations. WBW, Vadim Mironov
Redirection question
  12/27-23:15 . 1463  =?iso-8859-1?q?Pablo=20Pessagno?= <> [19]
___ Hello,I am just a newbie with Delegate. I have read the docs only once, I need to study them. I would like to know if there are ways to do the following: 1) Block & Redirect based on URL or MIME typ
Delegate License
  12/27-23:16 . 1464  =?iso-8859-1?q?Pablo=20Pessagno?= <> [19]
___ Hello, I am a new delegate user. I have one question about Delegate's License: is it like a BSD one, can I make a binary-only installation at a customer site? Do I have to make the source code avali
DeleGate/7.8.0 -- HOSTLIST, non-anonymous FTP MOUNT, etc.
  12/28-08:36 . 1465 (Yutaka Sato) [35]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.8.0.tar.{gz,bz2} DATE: Dec 28 07:19 JST 2001 TAR-SIZ
Delegated 7.8.0
  12/28-09:44 . 1466 [165]
___ Thank for New Year present :-) WBW, Vadim Mironov
delegate 7.8.0 ftp proxy problem
  01/02-16:29 . 1468  "Ferenc Toth" <> [47]
___ Hi, We've started using Delegate a few month ago and we're very statisfied with it's speed and stability (and featrues :). Today morning I've upgraded to 7.8.0 from 7.7.1 (Windows NT 4.0 + SP6a) due
  01/02-16:56 . 1469 (Yutaka Sato) [55]
___ Hi, Thank you for your notice. Indeed in 7.8.0 I made changes around FTP login breaking relaying "USER user@server" command to server. It will be fixed like a patch enclosed below. If you don't have
  01/02-17:00 . 1470  "Ferenc Toth" <> [12]
___ Thanks for the quick reply. We'll use the workaround until 7.8.1. Unfortunately I'm way to busy to set up gcc on Windows now :(
  01/02-17:07 . 1471 (Yutaka Sato) [23]
___ Maybe it is the best way because the security fix in 7.8.0 is for a rare situation when DeleGate is used as a HTTP proxy with customized message, and it has nothing to do with DeleGate as a FTP prox
images redirect in delegate
  01/04-00:15 . 1472 [45]
___ Dear Mr Sato, I'am using delegate on Solaris te redirect htps requests to http this is working fine but images are not displayed in the html pages. (for example images in the Lotus Notes databases)
block site
  01/05-14:34 . 1473  "anand" <> [36]
___ Sir, How to block site, for example: using delegate. Regards Anand
  01/05-16:13 . 1474 (Yutaka Sato) [30]
___ Have you read any documents about DeleGate? If not, I recommend you to read doc/tutor-en.htm or doc/Manual.htm which are included in the distribution file of DeleGate, or availavle on line as <URL:h
DeleGate/7.8.1 -- a fix for FTP proxy
  01/05-22:00 . 1475 (Yutaka Sato) [23]
___ Dear DeleGate users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.8.1.tar.{gz,bz2} DATE: Jan 5 17:25 JST 2002 TA
http proxy and shoutcast (ICY protocal)
  01/09-16:55 . 1477  "DraconPern" <> [18]
___ Can you add this code for shoutcast support? Thanks. in http.c ===find === if( strncmp(statline,"HTTP/",4) == 0 ){ BadServ = -1; return 0; } ===add === else if(strncmp(statline,"ICY/",3) == 0 ){ Bad
  01/09-18:05 . 1478 (Yutaka Sato) [85]
___ Sorry but I'll not support non-standard protocol in a way hard wired into a proxy which is following a standard. Your request can be fulfilled by introducing a way for customizing acceptable respons
Conference Calls For Less
  01/10-04:26 . 1479  "" <> [0]
http upload
  01/10-06:36 . 1480 [31]
___ I am running DeleGate 7.3.1 in Reverse Proxy mode. I am having a strange problem with HTTP uploads. My DeleGate server is on the outside of the Firewall, and my origin HTTP server is inside. While d
  01/10-06:51 . 1481 (Yutaka Sato) [31]
___ How long seconds they wait before timeout ? Shorten the timeout for buffering reuqest in DeleGate might be helpful. HTTPCONF=tout-buff-reqbody:1 See <URL:
Setting up mail relay server
  01/11-06:55 . 1482  "Jerôme Bakker" <> [23]
___ Hi! We have SuSE Linux 7.3 pro and are trying to setup a mail relay server with Delegate 7.7.1. Our clients use MS Oulook Express and when they try to get their mail (from different mailservers outs
SSL Session Caching
  01/13-01:00 . 1483  "Uzoka, Afam" <> [38]
___ Hi Im using your product as a means of replacing our inhouse built java ssl proxy and Apache mod_ssl/mod_proxy. Delegate is a fantastic product so please for the sake of the many who rely on it keep
  01/15-06:11 . 1484 (Yutaka Sato) [25]
___ Hi, I would consider supporting SSL session caching and s_client compatible logging. Sorry but I co-operate with users only in unconfidential way and any messages among us will be open at http://www
Delegate and DNS
  01/15-13:19 . 1485  tetu-s <> [32]
___ Dear colleagues, There are some situations such as requirements of very high security, I think. Currently, also I have some problems in: SERVER=dns So, I have managed proxy-based dns by SERVER=udpre
Can't send emails with attachements ?
  01/15-17:37 . 1486  =?iso-8859-2?Q?Pawe=B3_\=22gonzo\=22_Gontarek?= <> [41]
___ As in topic. System gives me always timeout when I'm trying to send emails with attached files. I have tested on few different providers and always the same problem... any ideas ??? gonz0
  01/15-17:37 . 1487  =?iso-8859-2?Q?Pawe=B3_\=22gonzo\=22_Gontarek?= <> [41]
___ As in topic. System gives me always timeout when I'm trying to send emails with attached files. I have tested on few different providers and always the same problem... any ideas ??? gonz0
HTTPS -> HTTP -> virus-checking ->HTTP -> HTTPS
  01/16-18:51 . 1488  Tobias Geis <> [21]
___ Hi, how do i configure delegate to do: I want delegate to decrypt HTTPS for virus-checking and encrypt the checked data for the HTTPS-Client. And another question : How has a configuration file look
Problem with ROUTE in Delegate FTP-Proxy
  01/16-19:35 . 1489  "Thilo Hilpert" <> [35]
___ Hi, I want to use a ROUTE command in our FTP-Proxy run by delegate to redirect our local users direct to our FTP server. This is done because the ftp server name they use runs over a NAT translation
  01/17-01:41 . 1490 (Yutaka Sato) [33]
___ On 01/16/02(19:34) you "Thilo Hilpert" <> wrote in <_A1489@delegate-en.ML_> Basically ROUTE is for forwarding to another proxy (FTP) server. Maybe what you n
doing nat??
  01/18-00:25 . 1491 [5]
___ does delegate do NAT/ip forwarding? ___ The FREE service that prevents junk email
how to configure this?
  01/18-00:51 . 1492 [33]
___ i have a network (LAN) that need access to internet. i have a server that is connected to the internet. also, i have web/smtp/pop server running on server. i want all client can access the 'net with
HTTPS -> HTTP -> virus-checking ->HTTP -> HTTPS
  01/18-01:58 . 1493 (Yutaka Sato) [23]
___ It's depends how the "virus-checking" works, as a HTTP proxy, or a filter program, or else? Or one parameter per line. See "PARAMETER SUBSTITUTION" section in <URL:
  01/18-05:07 . 1494  Tobias Geis <> [33]
___ We have programs which work as a HTTP proxy and programs with filters. Is there an big different between the configuration ? I know that i have to work with FCL/FSV sslway filter, the keys and certi
  01/18-16:06 . 1495 (Yutaka Sato) [94]
___ I suppose you need to connect to arbitrary HTTPS servers via a HTTP proxy (with virus checking). So you will use the HTTP proxy as a "SSL tunneling" proxy, which is usually named "security proxy", "
Cant get it to work
  01/22-01:08 . 1496  "Jerry Kizziar" <> [16]
___ I am having problems getting delegate to work. Basically I send through a url and every time I get can not find server or dns error. I start up the service like this: dg7_8_1 -v -P89 SERVER=http FSV
HTTPS -> HTTP -> virus-checking ->HTTP -> HTTPS
  01/22-07:05 . 1497  Tobias Geis <> [141]
___ Hi, first of all thanks for your help. But it still does not work like I want. :-( I need a configuration like the following: +---+ +---+ +---+ +---+ +---+ +---+ +---+ +---+ +---+ +---+ *** HTTPS --
nntp set up
  01/22-09:56 . 1498  "Andreas Freyvogel" <> [43]
___ Mr Sato, I am enjoying working and setting up DeleGate and I see it as a wonderful tool for me to implement within our company. I do have a question regarding the correct method of setting up proxyi
some problem of the development of delegate
  01/23-01:52 . 1499  "frus neo" <> [0]
HTTPS -> HTTP -> virus-checking ->HTTP -> HTTPS
  01/23-21:41 . 1500 (Yutaka Sato) [89]
___ Hi, Sorry but I could not understand what worked fine with what configuration parameters. Did you succeed to proxy HTTPS in configuraion like above? Does the "Viruscheck Proxy" work for "CONNECT" me
Empty-Articles = [1446][1467][1476]
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:04/08 03:13:21 (4 sec) Expires:04/08 09:13:17 @_@V