Articles delegate-en/1101-1200 of [1-5169] on the server localhost:119
  upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
range 1101 - 1200   digest:
Problem with Flash graphics
  04/17-20:00 . 1101  Roger Buck <> [55]
  Hi Yutaka, thank you for your prompt reply. I think this may be Delegate problem... or maybe I am expecting wrong result? Here is my test config file - I have tried using RELAY="novhost" and RELAY="
  04/17-20:18 . 1102  Roger Buck <> [11]
  Minor correction to silly error in previous message: The address above is (of course), for remote (slow) server Delegate server (64k) ip is R.
  04/18-01:02 . 1103 (Yutaka Sato) [54]
  Hi, Thank you for your information, it was helpful for me to find the cause of the problem in DeleGate. The problem is that DeleGate checks RELAY capability for "proxy" type when it is relaying to M
MOUNT from server not working?
  04/18-02:25 . 1104  Max Tran <> [21]
  Hi, I need help with the MOUNT command. I am using Delegate v 6.1.22 with the line MOUNT="/vendor/**". When I upgraded to a 7.x version and use the same mount line, I ran int
  04/18-02:41 . 1105 (Yutaka Sato) [25]
  Hi, I tried not to change the specification from 6.x to 7.x. Could you show me the concrete version of your 7.x ? And could you tell me a real example of "" ? Cheers, Yutaka @ @ Yutak
delegate as FTPS-proxy blocks
  04/18-04:43 . 1106 (Yutaka Sato) [44]
  I found the answer in the internet-draft: <URL:> Although deprecated now, this implicit approach using a dedicated FTP-TLSPORT, ie
What is VSAP?
  04/18-07:05 . 1107  James Johnston <> [33]
  Hmmm - that might solve my problem. My problem is that I have a computer on a network that needs to access the Internet. I have another computer on the same network that is also on the Internet. Now
  04/18-15:08 . 1108 (Yutaka Sato) [45]
  on 04/18/01(07:05:16) You mean you are using DeleGate as a SOCKS server? SOCKS protocol has a mechanism to accept incomming connection (at dynamically assigned port on Socks server) which is used fo
MOUNT from server not working?
  04/18-22:26 . 1109  Max Tran <> [65]
  Thanks again for your help. I run v 7.1.2 with the command "delegated +=delgate2.conf" where the content of delgate2.conf is below: --BEGIN OF FILE--- -P9299 ADMIN="max@ohiolink.." ADMINPASS="some s
Question about SSLTUNNEL
  04/19-01:00 . 1110  Mike Potopaev <> [19]
  Hello from Russia, Yutaka. I use Delegate 7.2.0 in such configuration: "delegated -P1080 SERVER=socks SSLTUNNEL=upstream_proxy_ip:port" How i can do the same, but with authorisation to "upstream_pro
MOUNT from server not working?
  04/19-15:18 . 1111 (Yutaka Sato) [73]
  The last line in your real configuration file must be "... http://...". Thank you, I checked it to see the situation as you said. The destination server,, seems to require client
Question about SSLTUNNEL
  04/19-16:13 . 1112 (Yutaka Sato) [60]
  If you see a line like this in your LOGFILE: 04/19 16:09:55.40 [4019] 1+1: SSL-TUNNEL>> HTTP/1.0 407 Proxy Authentication Required^M the upstream proxy server is asking authorization in Proxy-Author
MOUNT troubles
  04/20-02:42 . 1113 (Yutaka Sato) [42]
  Hi, Thank you. I did reproduced the problem... and found the cause is very generic and disables any response header rewriting. (! X-) [CHANGES] The enclosed patch will fix the problem. Cheers, Yutak
Problem with Flash graphics
  04/20-08:39 . 1114  Roger Buck <> [13]
  Just to confirm - Patch works.. as expected ;^) Many thanks R. [--snip--]
delegate as FTPS-proxy blocks
  04/20-20:34 . 1115  dirk laurijssen <> [61]
  Hi, I did some comparison between various FTPS-clients. They all seem to live up to the IETF-recommandations, meaning that they all no longer support implicit FTP, and went to supporting RFC2228. Ba
Max # of MOUNTS?
  04/21-05:49 . 1116  "Timothy P. Schlie" <> [10]
  I am using delegate as a proxy to a bunch of virtual hosts. I have found that deletate will refuse to load if I have more that 92 virtual hosts, which in the logs seems to mean 95 MOUNTS listed as a
sslway client auth problem
  04/22-20:32 . 1117  Roger Buck <> [97]
  Using delegated-7.1.2 + sslway on Linux RH6.2, I cannot get sslway to accept client certificates (server certificates load correctly). First error message from delegated log is "unable to get local
Disconnect suddenly
  04/25-15:13 . 1118 [24]
  Dear Guys, I am using Delegate 7.1.2. as a telnet proxy from outside to my internal network. I ran delegate with the following parameter delegated -P9527 SERVER=telnet -vt PERMIT="*:*:*" RELIABLE=*
  04/25-15:41 . 1119 (Yutaka Sato) [32]
  Hi, Could you use "-v" option instead "-vt" to see the reason why DeleGate did the disconnection ? Since the default timeout on idling is 10 minutes, 5 minutes in your case seems too short anyway. B
sslway client auth problem
  04/25-15:48 . 1120  Roger Buck <> [234]
  After a lot of exprimentation I found that Delegate is "choosey" about paths. For example, the sslway "-CApath dir" option would not work with "-CApath /lib" where "lib" dir is a sub-dir of delegate
errno=98 : cannot open port=8080
  04/26-05:57 . 1121  root <> [16]
  I'm really new with proxies, I installed delegated but when I try to start it ... [root@localhost /root]# delegated -v -P8080 SERVER=http 04/25 16:50:22.21 [1847] 0+0: PORT> -P8080 04/25 16:50:22.31
  04/26-12:31 . 1122 (Yutaka Sato) [35]
  $ grep 98 /usr/include/*/errno.h /usr/include/asm/errno.h:#define EADDRINUSE 98 /* Address already in use */ that is, another process is using the port. You can see how the port 8080 is used like: $
DeleGate/7.2.2(beta) -- new SRCIF and fixes (MOUNT, SMTP, etc)
  04/26-16:34 . 1123 (Yutaka Sato) [34]
  Dear users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.2.2.tar.gz DATE: Apr 26 15:34 JST 2001 SIZE: 945793 byte
Netscape Messenger 6 or Outlook 2000 Problem
  04/26-20:58 . 1124  "Jonathan Jodry" <> [12]
  A general question: it is not possible to access to mail server via Netscape Messenger 6 or Outlook 2000. The only hint given by those programs is "Not such server". Is there any possibility to corr
DeleGate/7.3.0 -- new stable version
  04/27-05:18 . 1125 (Yutaka Sato) [22]
  Dear users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.3.0.tar.gz DATE: Apr 27 04:19 JST 2001 SIZE: 946295 bytes MD5
Disconnect suddenly
  04/27-10:13 . 1126 [85]
  Dear Mr. Yutaka, Thanks for your prompt reply. I've followed ur post and i still got disconnected. Here is what is in the log with -v 04/27 08:58:03.55 [4559] 1+0: CS-EOF 04/27 08:58:03.55 [4559] 1+
DeleGate 7.3.0
  05/01-20:38 . 1127  Murali Kumar <> [67]
  Dear Sir, Congratulations for Your Excellent Software ( DeleGate 7.3.0 ) Your software has been selected in the category " Network ---> Proxy Servers" by our editorial team. Come to http://www.softl
  05/02-21:28 . 1128  Nadeesh Condon <> [15]
  Hi, The present scenerio of my network is: one machine running on linux and with public ip and my internal machines with ips from to . Now my qmail server is running on mac
  05/02-21:31 . 1129  Nadeesh Condon <> [15]
  Hi, The present scenerio of my network is: one machine running on linux and with public ip and my internal machines with ips from to . Now my qmail server is running on mac
can't downloading delegate
  05/05-02:06 . 1130  "Vincent PAILLER" <> [7]
  hello my name is vincent pailler and i would try delegate as proxy pop and smtp server , i live in france at paris. I tryed to download your product several time but your ftp site doesn't answer, wo
Disconnect suddenly
  05/08-14:46 . 1131 (Yutaka Sato) [57]
  Hi, I need a little more lines preceeding the following log. "CS-EOF" indicates a typical situation where the Telnet connection is closed by the client side. I can reproduce it like this: % delegate
can't downloading delegate
  05/08-15:03 . 1132 (Yutaka Sato) [20]
  Which server do you mean is "my ftp site" ? The original FTP server of DeleGate distribution is <URL:> as listed in DeleGate home page at <URL:
delegate as FTPS-proxy blocks
  05/08-15:50 . 1133 (Yutaka Sato) [26]
  Hi, I expect it will not take so much time to cope with "AUTH TLS" of FTP from the expecience of implementation of "START TLS" of SMTP etc. I'll try to implenet it if you could introduce some freely
problems with INETD
  05/09-15:30 . 1134 (Yutaka Sato) [63]
  Hi, I'm sending this message to "" (which will be distributed at <URL:>) to share the the solution for your problem. Any comments on DeleGate ar
  05/09-15:50 . 1135 (Yutaka Sato) [32]
  It will be fixed like enclosed patch. Cheers, Yutaka @ @ Yutaka Sato <> ( - ) National Institute of Advanced Industrial Science and Technology (AIS
Netscape Messenger 6 or Outlook 2000 Problem
  05/09-16:07 . 1136 (Yutaka Sato) [22]
  A general answer: it is difficult to answer about how to set up client programs so that they use a specified (proxy) server instead of their default ones. You will get answer from the vendor of each
  05/09-16:29 . 1137 (Yutaka Sato) [22]
  Something like follows will do. delegated -PpublicIp:portNumber \ SERVER=tcprelay:// \ RELIABLE="{listOfAcceptableExternalAddresses}" See <URL:
sslway client auth problem
  05/09-17:50 . 1138 (Yutaka Sato) [47]
  Hi Roger, "-Verify 0" instead of "-Vrfy" might solve the problem, could you test it with the enclosed patch? Cheers, Yutaka @ @ Yutaka Sato <> ( -
  05/09-18:31 . 1139  Nadeesh Condon <> [42]
  Hi, You are simply great. Thank you for giving response ---Original Message--- From: (Yutaka Sato) To: Sent: May 9, 2001 7:29:34 AM GMT Subject: Re: [Dele
  05/09-22:51 . 1140  Nadeesh Condon <> [51]
  Hi, I am quite new to these things. Second question I am running delegate 7.1.2 on redhat linux 7.0 and this machine has two NIC with public IP a.b.c.d and one with private IP e.f.g.h. Now i want us
can't downloading delegate
  05/10-00:50 . 1141  "Vincent PAILLER" <> [31]
  thank you for your answer. i'd experimented when i try to reach the ftp site or the ftp site , i'd never obtain an answer. but i'
regarding delegate and FTPS
  05/10-16:23 . 1142 (Yutaka Sato) [187]
  Hi, Thank you for your information. I got the evaluation version of "WS-FTP Pro" to test "AUTH TLS" of SSLway/DeleGate implemented with the enclosed patch and invoked with following options: SERVER=
can't downloading delegate
  05/10-23:44 . 1143 (Yutaka Sato) [29]
  I suppose the situation is like this: - you failed to download DeleGate files via FTP maybe because your host is behind some kind of firewall which only allows a restricted set of protocols (ports),
  05/11-01:35 . 1144  "Vincent PAILLER" <> [37]
  your are right , thank you ! cheers V. Pailler Yutaka Sato a 馗rit :
sslway client auth problem
  05/13-13:24 . 1145  Roger Buck <> [476]
  Hi Yutaka, thank you for posting the sslway patch. Unfortunately, the original problem remains. I upgraded Delegate to V7.3 (latest release version), before applying the sslway patch. I think I have
  05/14-15:02 . 1146 (Yutaka Sato) [57]
  Hi, Thank you for your sending log. I saw verifications for each connection, maybe for each in-line image, recorded in your log, and I noticed that the situation is inevitable with the current SSLwa
  05/14-21:11 . 1147 [179]
  Sorry for maybe naive question. I can't configure Delegate to act how FTP/HTTP gateway. I make connect from HTTP-Delegate to generalist Delegate. Generalist make request, get info and write to cache
  05/15-13:49 . 1148 (Yutaka Sato) [26]
  It's a usual warning message informing HTTP Keep-Connection-Alive is disabled because content-size information is not available, which is not serious nor fatal. Not a FAQ but a simple tutorial and a
still problems with INETD
  05/15-16:58 . 1149  "davy_vs" <> [23]
  I still keep becoming the same result as therefore. I typ the following: delegated INETD="8099 stream tcp - - /home/davy/test1 test1" test1 is a small C program. I want to run this C program on port
Netscape Messenger 6 or Outlook 2000 Problem
  05/15-18:15 . 1150  "Jonathan Jodry" <> [49]
  Hello, thanks for your answer. As you have noticed, I don't know a lot on connections through a proxy... However, I will try to precise my problems, and indicate the solutions that are working for o
still problems with INETD
  05/16-02:15 . 1151 (Yutaka Sato) [51]
  Sorry but I can't believe that you did the patch for admin.c:daemonControl() which will modify the function like this: ! || streq(iSERVER_PROTO,"exec") The message "But this DeleGate ... *exec* prot
Netscape Messenger 6 or Outlook 2000 Problem
  05/16-02:37 . 1152 (Yutaka Sato) [55]
  Thank you. I think your problems can be solved by using the '%' character to separate a user name and a host name, like USER%SERVER. I don't know about NTLM but could find something which seems rele
DeleGate/7.3.1 -- FTP and SSL fixes, AUTH TLS support
  05/16-15:30 . 1153 (Yutaka Sato) [32]
  Dear users, I inform you of the new release of DeleGate available as follows: SITE: FILE: delegate7.3.1.tar.gz DATE: May 16 15:05 JST 2001 SIZE: 946223 bytes MD5
  05/16-19:44 . 1154  "Maxime Dubois" <> [45]
  Hello, How can I make DeleGate acting as a POP relay with communication between client and Proxy encrypted (SSL)? And the same for STMP? Could it be possible to previously authenticate the client on
(J)Delegate 7.3.0 build error at HP-UX 11.0
  05/16-20:19 . 1155  "TSUJIMURA,HIROSHI (HP-Japan,ex4)" <> [30]
  Dear folks. I have tried to build delegate 7.3.0 on HP systems. HP-UX 11.0 32 bit version on HP9000/G40 HP-UX 11.0 64 bit version on HP9000/K370 (Using HP ANSI C compiler in both cases) Following er
sslway help!
  05/16-22:43 . 1156  "Robin Gorris" <> [14]
  Hi, I made some changes to the sslway.c file, because I wanted the verify_callback(ok,ctx) - function to do some additional checks. So far so good. But I also want to debug my changes and I wouldn't
sslway help! (more info)
  05/17-00:23 . 1157  "Robin Gorris" <> [18]
  By the way, I'm using gdb as debugging tool and I'm working with delegate version 7.3.1. I'll write the startup script I use underneath. More thanks, Robin G. Here's how I start delegate /opt/dladel
FTP/HTTP gateway
  05/17-13:53 . 1158 [240]
  Sorry for maybe naive question. I can't configure Delegate to act how FTP/HTTP gateway. I make connect from HTTP-Delegate to generalist Delegate. Generalist make request, get info and write to cache
problems with inetd
  05/18-00:43 . 1159  "davy_vs" <> [10]
  I really placed the extra patch in admin.c but still keep getting the same error message. I even downloaded the latest version of DeleGate, but still i canエt run my test program with it. When I ask
FTPS seems to not check client-certificates
  05/18-06:06 . 1160  dirk laurijssen <> [110]
  dear yutaka, when I launch the delegate as a FTPS-proxy using : delegated -P8021 -v FCL="sslway -cert /tmp/server-cert.pem -key /tmp/server-key.pem -ac -Vrfy -vd" DGROOT=/tmp SERVER=ftp://<ip-adres>
Go Explorer, Failure to Connect to Download
  05/18-21:46 . 1161  James Garnett Munguia <> [18]
sslway client auth problem
  05/20-19:57 . 1162  Roger Buck <> [59]
  Hi Yutaka, I have applied http.c patch (see below) but problem (multiple prompts for client certificate) remains. Change of behaviour following installation of patch: 1. The problem is less severe (
FTPS seems to not check client-certificates
  05/21-16:22 . 1163 (Yutaka Sato) [43]
  Hi, In your configuration: < FCL="sslway -cert /tmp/server-cert.pem -key /tmp/server-key.pem -ac -Vrfy -vd" < CMAP="sslway -St:FCL:ftp" < CMAP="sslway:FCL:ftp-data" unconditional FCL makes condition
  05/21-16:40 . 1164 (Yutaka Sato) [23]
  Hi, See <URL:> about how to use SSL with DeleGate, using "SSLway" filter program, just like "FCL=sslway". If your client program requires explicit negotiation ab
(J)Delegate 7.3.0 build error at HP-UX 11.0
  05/21-17:04 . 1165 (Yutaka Sato) [44]
  On 05/16/01(20:19) you "TSUJIMURA,HIROSHI (HP-Japan,ex4)" <> wrote I did the modification in DeleGate/7.2.1: [CHANGES] to solve another problem in make, <URL
Broken link in
  05/21-17:52 . 1166  Roy Bryant <> [22]
  There appears to be a problem on this page of your site. On your page when you click on your link to you get the error: Domai
  05/21-19:14 . 1167  "Maxime Dubois" <> [54]
  Hi Yutaka, Thanks for your help. Here is how I run my POP relay: dg7_3_1 -v -P110 FCL="sslway -st -Vrfy -CAfile=d:\Cacert.pem" SERVER=pop://pop.server.domain ADMIN=email@company.. I have now a POP r
  05/22-02:48 . 1168 (Yutaka Sato) [25]
  Hi, Are you sure that the client is connecting to your POP-DeleGate with SSL? What will happen if you ommit "-st" or change it to "-St"? SSLway with "-st" option accepts non-SSL connection as well a
  05/22-22:26 . 1169  "Maxime Dubois" <> [55]
  Hi, No, actually, I used a sniffer and saw the connection between client and POP-Delegate is not encrypted... I saw "STARTLS" on the console and thought it was, but I was wrong. When I use the -St o
problems with inetd
  05/22-23:01 . 1170  "davy_vs" <> [9]
  I would like to thank you for helping me with inetd, I've just found what I was doing wrong, a small failure on my computer. And now everething works fine. Thanks But again I have a question, how ca
  05/23-01:33 . 1171  "Maxime Dubois" <> [31]
  Hi again, I looked deeper into my problem and wonder if Delegate, when it received encrypted data from the client on POP/SSL, decrypt it to send it to the POP server? Here is some lines that appears
  05/23-02:12 . 1172 (Yutaka Sato) [35]
  Hi, I am not sure of what console you mean and what is "STARTLS". It might be the console of DeleGate showing "STARTTLS" ... How did you configure your Netscape to use POP on SSL? As far as I know,
problems with inetd
  05/23-02:40 . 1173 (Yutaka Sato) [22]
  It might be a useful feedback if you would show what was wrong. (could be caused by the command PATH?) I'm not sure of what IP address you mean. If you mean selecting one of addresses of the host of
hash function for cache
  05/23-20:08 . 1174 [196]
  It looks like that hash function output in range 0-1f, not 0-ff as it defined at documentation With best regards, Vadim Mironov, Almaty, Kazakhstan Design department, Halyk Savings Bank of Kazakhsta
  05/24-15:15 . 1175 (Yutaka Sato) [24]
  Yes, the document <URL:/delegate/Manual.htm#CACHEFILE> was wrong and I'll correct it in the next release like follows. Thank you. [Manual.htm] Cheers, Yutaka @ @ Yutaka Sato <> ht
Log format
  05/24-18:17 . 1176 [54]
  Where can I find extended Delegate log format for http ( and maybe ftp). At docs this moment is miss. And maybe put full format logs at docs, don`t refer to Common CERN-httpd format. Please :-) With
Socks client - Delegate-FTP
  05/24-18:48 . 1177 [63]
  I try configuring followed configuration: Internet Explorer - SOCKS - Delegate SOCKS Server ( as variant - additional Master Delegate here) - destination FTP server. I cannot force delegate use FTP
  05/25-15:45 . 1178 (Yutaka Sato) [25]
  Hi, It is difficult to figure out solutions without knowing what you did and what you got. Tell us necessary information including parameters and log output like that in: <URL:http://www.delegate.or
your internet address
  05/27-10:53 . 1179  "" <> [31]
  We were referred to you by a friend and understand that you may be interested in securing your very own domain name. Did you know that domain names are being registered at the rate of more than 30,0
IP address selecting
  05/29-18:23 . 1180  "davy_vs" <> [5]
  I want to make a filter with delegate, you can only get through the filter if your IP address matches with the address you have giving in the delegated command rule. How can I set this command line
Extended log format
  05/29-19:23 . 1181 [215]
  One question about extended http delegated log format: what mean various letters at status field? I watch RW, N, P and other. Where I can find this info? Vadim Mironov, Almaty, Kazakhstan Design dep
IP address selecting
  05/30-00:35 . 1182 (Yutaka Sato) [17]
  See <URL:> about access control parameters of DeleGate. RELIABLE=xx.xx.xx.xx can be what you need. Cheers, Yutaka @ @ Yutaka Sato <>
Extended log format
  05/30-00:45 . 1183 (Yutaka Sato) [16]
  They are mainly for debugging and represent how a request/response is processed with cache, with an upstream proxy, etc. You will find a little more in src/http.h. Cheers, Yutaka @ @ Yutaka Sato <y.
Problems using delegated with imap
  06/01-02:16 . 1184  Attilio Vaccaro <> [49]
  Sorry for my previous post in the personal mailbox: I won't cut the previous messages in order to let anyone read my question. The problem that we're having is that even if we set the option: SERVER
  06/01-16:08 . 1185 (Yutaka Sato) [56]
  Hi, If you could show me exact log data, it will be useful for finding out what is the problem. The behavior of IMAP-DeleGate bound for specific IMAP-server can be tested like follows: % delegated -
LogFile behavior
  06/02-19:41 . 1186 [229]
  Greetings. I try Logformat [date+format] described at documentation and find following thing: When Delegate find old file with nonzero size it rename old file to random(not random - not significant)
.BIZ .INFO domain extensions
  06/04-19:39 . 1187  "" <> [34]
  Attention: Internet Domain Registrant The new top level domain names with extensions .BIZ, .INFO, .PRO, and .NAME have just been approved by global internet authorities and will be released soon, bu
Portrange for passive FTP
  06/05-17:21 . 1188  "Robin Gorris" <> [14]
  Greetings, I want to use Delegate as a FTP proxy in passive mode. Is there a way to determine a portrange for the data-channel for the client to connect to? Kind regards, Robin *** Robin Gorris Synt
  06/06-13:28 . 1189 [161]
  Vadim Mironov, Almaty, Kazakhstan Design department, Halyk Savings Bank of Kazakhstan.
  06/06-16:51 . 1190  "Robin Gorris" <> [13]
  Thanks for your reply. But what I really wanted to know is how to make Delegate SET a range of ports that can be used by the client so that the server doesn't have to open every single port above 10
FTP through SOCKS Delegate
  06/07-14:49 . 1191 [887]
  More detailed description of problem. I want: Client (IE) for ftp connection use socks to connect to Delegate on port 1080. Socks Delegate connect to Master Delegate on port 8128( I read about such
Portrange for passive FTP (not supported)
  06/08-08:51 . 1192  dirk laurijssen <> [29]
  Vadim, you're right, the default behaviour is that an FTP-server returns a high-port. What the author of the previous message probably was referring to is that along with firewall-friendly FTP (RFC1
  06/08-11:27 . 1193 [320]
  Thank you, Dirk, I don`t know about this RFC specification. It is no more logical connect internal ftp server directly to firewall? As I understand Delegate concept it is deliver outside services to
how make the delegate on Sun solaris 2.6
  06/10-18:26 . 1194  "Teamsun" <> [48]
  Dear Mr./Ms. I don't know how to compile delategate 7.3 and how to install it on solaris 2.6 OS, could you tell me how to make it and how to download the installation documentation. thank you! your
  06/13-13:53 . 1195  "Tim -" <> [19]
  Hello, My name is Tyson Richards from Trellian Internet Software. We produce an award winning FTP client called Trellian FTP. Trellian FTP We have just been browsing you
Running non-SSL-FTP-clients to logon to SSL-FTP-servers...
  06/14-03:47 . 1196  "Markus Liljergren" <> [15]
  I am trying to make non-SSL-FTP-clients to logon to SSL-FTP-servers, this I have been trying to do using Windows 2000 and Delegate with SSLWay. But I can't make out what command-line to use, the las
FTP through SOCKS Delegate
  06/14-16:42 . 1197 (Yutaka Sato) [44]
  Since you are using DeleGate as a Socks server, i.e. a circuit level proxy which does not care any application level protocol like FTP, there is no chance for the DeleGate (or for any circuit level
Portrange for passive FTP (not supported)
  06/14-17:39 . 1198 (Yutaka Sato) [34]
  Basically, FTP-DeleGate with -PX option (port number X for control connection) creates a data connection with a port number X-1. Thus it should be enough to open X and X-1 so that FTP-DeleGate can a
FTP through SOCKS Delegate
  06/15-19:02 . 1199 [88]
  Well, maybe you help me, how I can implement something like my wishes? Problem is Internet Explorer. I use autoconfig feature of IE, and correct answer of autoconfig function is only proxy or socks
Logfile behavior
  06/15-19:06 . 1200 [240]
  Greetings. I try Logformat [date+format] described at documentation and find following thing: When Delegate find old file with nonzero size it rename old file to random(not random - not significant)
  admin search upper oldest olders older1 this newer1 newers latest
[Top/Up] [oldest] - [Older+chunk] - [Newer+chunk] - [newest + Check]
Generated:02/28 08:26:19 (4 sec) Expires:02/28 14:26:15 @_@V