On 02/26/99(18:50) you peiaqbdyi.ml@ml.delegate.org wrote in <_A311@delegate-en.ML_> | The remote (Internet application) get's | an X IO error to the delegate proxy machine (connection | reset by peer). | If the whole stuff is tested on an X-terminal. | It works fine on the internal net for normal | UNIX workstations.... To figure out what is going on, I think I need exact messages and dialogues left on your Telnet client's screen as is. Also the LOGFILE of Telnet-DeleGate will give us important hints about what the problem is... First of all , thanks for your renewed reply on this issue : Part I : Transcript of ptelnet session ---------------------------------------- me@eureka> k me@eureka> ptel xhost +xproxy xproxy being added to access control list me@eureka> ptelnet !! The proxy telnet service has been replaced by a new !! program. This change has been imposed due to modifications !! relating to the firewall configuration. Type the Internet hostname of the machine which you want to telnet to at the Hostname prompt. The X-proxy service of this program can not be used due to complex firewalling considerations (addressing). Trying... Connected to dmz2. Escape character is '^]'. -- -- @ @ dmz2.imec.be PROXY-telnet server DeleGate/5.8.3 -- ( - ) { Hit '?' or enter `help' for help. } DeleGate/5.8.3 (December 17, 1998) AIST Research Product No. 1994-ETL-8715-1 Copyright (c) 1994-1998 Yutaka Sato Copyright (c) 1994-1998 Electrotechnical Laboratry (ETL), AIST, MITI WWW: http://wall.etl.go.jp/delegate/ -- -- -- This (proxy) service is maintained by 'helpdesk@imec..be' >> Host name: a xproxy ####[X-Proxy] accept host 'xproxy' ####[started] use DISPLAY '10.1.1.12:14.0' >> Host name: x bristol:0 >> Host name: duchesse.esat.kuleuven.ac.be -- Trying duchesse.esat.kuleuven.ac.be [134.58.63.135:23] ... -- Connected to duchesse.esat.kuleuven.ac.be. ####[set manually] setenv DISPLAY 10.1.1.12:15.0 Telnet TERMINAL-SPEED option ON Local flow control on HP-UX duchesse B.10.20 E 9000/780 (ttyp4) login: imec Password: Please wait...checking for disk quotas ========================================================== Welcome to the HP-environment at ESAT, K.U.Leuven Information about ESAT, the software environment and the network topology can be found on the esat WWW-server. In case of questions or problems: - FIRST check the local web pages for support on your problem at: http://www.esat.kuleuven.ac.be/local/ITstructure/ - if unsuccesful, send an e-mail to: problems@kuleuven..be office 91.03 (opposite computerroom) tel: 1080, 1017, 1107 In case of real urgencies after working hours: 016/23.77.64 (S.Boving) 016/73.43.32 (E.Olemans) 03/449.14.47 (F.Schoeters) ========================================================== You have mail. imec@duchesse>setenv DISPLAY xproxy.imec.be:15.0 imec@duchesse>xterm XIO: fatal IO error 232 (Connection reset by peer) on X server "xproxy.imec.be:15.0" after 0 requests (0 known processed) with 0 events remaining. imec@duchesse> imec@duchesse>exit imec@duchesse>logout -- -- @ @ dmz2.imec.be PROXY-telnet server DeleGate/5.8.3 -- ( - ) { Hit '?' or enter `help' for help. } DeleGate/5.8.3 (December 17, 1998) AIST Research Product No. 1994-ETL-8715-1 Copyright (c) 1994-1998 Yutaka Sato Copyright (c) 1994-1998 Electrotechnical Laboratry (ETL), AIST, MITI WWW: http://wall.etl.go.jp/delegate/ -- -- -- This (proxy) service is maintained by 'helpdesk@imec..be' >> Host name: Connection closed by foreign host. me@eureka> exit me@eureka> Part II : log file from delegate we use 5.8.3, but I also have the same problem with 5.8.8. ---------------------------------------------------- Initial messages when setting the display and x-allow connection from in ptelnet command menu : 03/18 10:10:45.04 [9308] 599+0: UDP_client_open[7] time://xproxy:37 ... 03/18 10:10:45.04 [9308] 599+0: checkIF-UDP connected [7] {146.103.254.12:37 <- 10.1.1.12:2264} [0.000s] 03/18 10:10:45.04 [9308] 599+0: myname = dmz2.imec.be 03/18 10:10:45.04 [9308] 599+0: server_open(Xpxdisplay,dmz2.imec.be:6010,listen=1) 03/18 10:10:45.04 [9308] 599+0: server_open: dmz2.imec.be:6010 03/18 10:10:45.04 [9308] 599+0: bind_inet failed: ERRNO=98 03/18 10:10:45.04 [9308] 599+0: server_open() failed 03/18 10:10:45.04 [9308] 599+0: server_open(Xpxdisplay,dmz2.imec.be:6011,listen=1) 03/18 10:10:45.04 [9308] 599+0: server_open: dmz2.imec.be:6011 03/18 10:10:45.04 [9308] 599+0: bind_inet failed: ERRNO=98 03/18 10:10:45.04 [9308] 599+0: server_open() failed 03/18 10:10:45.04 [9308] 599+0: server_open(Xpxdisplay,dmz2.imec.be:6012,listen=1) 03/18 10:10:45.04 [9308] 599+0: server_open: dmz2.imec.be:6012 03/18 10:10:45.04 [9308] 599+0: server_open(Xpxdisplay,dmz2.imec.be:6012) BOUND 03/18 10:10:45.04 [9308] 599+0: Xproxy -- dmz2.imec.be:6012.0 -- 10.1.1.12:12.0 03/18 10:10:45.04 [9309] 599+0: -- Fork(Xpxdisplay): 9308 -> 9309 03/18 10:10:45.04 [9308] 599+0: #### Xproxy[9309]: <- 10.1.1.12:12.0 <- xproxy 03/18 10:11:50.78 [9308] 599+0: TIS compati. proxy-telnet with X-proxy Message when connecting to the remote Internet machine : 03/18 10:12:22.32 [9308] 599+0: #### no authorization required 03/18 10:12:22.32 [9308] 599+0: bind_insock(7,10.1.1.12,0) = 0 03/18 10:12:22.69 [9308] 599+0: TELNET LOGIN FROM eureka(elsen) TO duchesse.esat.kuleuven.ac.be 03/18 10:12:22.70 [9308] 599+0: #### ConnectToServer: DFLT=telnet://duchesse.esat.kuleuven.ac.be:23 REAL=://:0 03/18 10:12:22.71 [9308] 599+0: ConnectToServer connected [15] {134.58.63.135:23 <- 10.1.1.12:4777} [0.008s] 03/18 10:12:22.87 [9308] 599+0: ######## 3 bytes from the server 03/18 10:12:22.87 [9308] 599+0: server_open(Xpxdisplay,dmz2.imec.be:6010,listen=1) 03/18 10:12:22.87 [9308] 599+0: server_open: dmz2.imec.be:6010 03/18 10:12:22.87 [9308] 599+0: bind_inet failed: ERRNO=98 03/18 10:12:22.87 [9308] 599+0: server_open() failed 03/18 10:12:22.87 [9308] 599+0: server_open(Xpxdisplay,dmz2.imec.be:6011,listen=1) 03/18 10:12:22.87 [9308] 599+0: server_open: dmz2.imec.be:6011 03/18 10:12:22.87 [9308] 599+0: bind_inet failed: ERRNO=98 03/18 10:12:22.87 [9308] 599+0: server_open() failed 03/18 10:12:22.87 [9308] 599+0: server_open(Xpxdisplay,dmz2.imec.be:6012,listen=1) 03/18 10:12:22.87 [9308] 599+0: server_open: dmz2.imec.be:6012 03/18 10:12:22.87 [9308] 599+0: bind_inet failed: ERRNO=98 03/18 10:12:22.87 [9308] 599+0: server_open() failed 03/18 10:12:22.87 [9308] 599+0: server_open(Xpxdisplay,dmz2.imec.be:6013,listen=1) 03/18 10:12:22.87 [9308] 599+0: server_open: dmz2.imec.be:6013 03/18 10:12:22.87 [9308] 599+0: bind_inet failed: ERRNO=98 03/18 10:12:22.87 [9308] 599+0: server_open() failed 03/18 10:12:22.87 [9308] 599+0: server_open(Xpxdisplay,dmz2.imec.be:6014,listen=1) 03/18 10:12:22.87 [9308] 599+0: server_open: dmz2.imec.be:6014 03/18 10:12:22.87 [9308] 599+0: server_open(Xpxdisplay,dmz2.imec.be:6014) BOUND 03/18 10:12:22.87 [9310] 599+0: -- Fork(Xpxdisplay): 9308 -> 9310 03/18 10:12:22.87 [9308] 599+0: Xproxy -- dmz2.imec.be:6014.0 -- 10.1.1.12:14.0 03/18 10:12:22.87 [9308] 599+0: #### Xproxy[9310]: bristol:0 <- 10.1.1.12:14.0 <- duchesse.esat.kuleuven.ac.be 03/18 10:12:22.87 [9311] 599+0: -- Fork(bidirectiona_relay): 9308 -> 9311 Problem area is here : x-session from Internet machine is launched : -- no extra messages seen ---- Messages which appear when logout: 03/18 10:14:44.61 [9311] 599+0: sock=15 read=0, errno=0 03/18 10:14:44.61 [9311] 599+0: SC-EOF 03/18 10:14:44.61 [9311] 599+0: SC-RELAY[14<15]: 1589Bytes 133I/O buf=1024 03/18 10:14:44.61 [9311] 599+0: Kill(9308,15) 03/18 10:14:44.61 [9308] 599+0: CS-RELAY[14>15]: 224Bytes 137I/O buf=1024 03/18 10:14:44.61 [9308] 599+0: Kill(9311,15) 03/18 10:14:44.61 [9308] 599+0: Kill(9310,15) 03/18 10:14:49.73 [9308] 599+0: EOF from the client 03/18 10:14:49.73 [9308] 599+0: disconnected [14] -@[146.103.1.13]eureka:4279 (264.135s)(0)
V