Thank you very much.
All problems were resolved and SockMux is wonderful actually.
I think I can contruct a VPN through SockMux and firewall.
But there is an important issue I can't understand exactly,
what is the main advantage of tunnel mode ?
----- Original Message -----
From: "Yutaka Sato" <firstname.lastname@example.org>
Sent: Tuesday, January 21, 2003 5:57 PM
Subject: Re: [DeleGate-En] $BC;SP1jLb(B
> In message <email@example.com> on 01/01/70(09:00:00)
> you firstname.lastname@example.org wrote:
> |And then, I tried FIFO mode like following:
> |1) Install delegate on a machine
> |2) Create 2 FIFO devices by:
> | mkfifo /tmp/com0
> | mkfifo /tmp/com1
> |3) Launch 2 delegated process by:
> | ./delegated SERVER=sockmux:commin@/tmp/com1 SERVER=sockmux:commout@/tmp/com0 -P9023
> | ./delegated SERVER=sockmux:commin@/tmp/com0 SERVER=sockmux:commout@/tmp/com1 SERVER=http
> Try as follows:
> "PORT=9023" instead of "-P9023" at the first delegated, and
> "SERVER=http,-in" instead of "SERVER=http" at the second delegated.
> |4) The 2 servers started correctly.
> You should see the LOGFILE of DeleGate to find that the DeleGate was
> not working correctly. Running delegated with -v option is
> recommended too.
> @ @ Yutaka Sato <email@example.com> http://www.delegate.org/y.sato/
> ( - ) National Institute of Advanced Industrial Science and Technology (AIST)
> _< >_ 1-1-4 Umezono, Tsukuba, Ibaraki, 305-8568 Japan
> Do the more with the less -- B. Fuller